Members GaryNunn Posted May 5, 2015 Members Report Posted May 5, 2015 I'm about to buy a leather stitching machine, I've narrowed my choices down to a new Cowboy CB3200 or a gently used Artisan 3200. I can get either for about the same amount. I'm completely on the fence between these two machines. I intend to use the machine for leather holsters and other accessories. I also want to use up to 346 thread and I don't anticipate needing to stitch more than 3/8 to 1/2. Anyone have any experience with both machines? Thanks, Gary Quote _____________________________________________ Only those who dare to fail greatly can ever achieve greatly. ~ Robert F. Kennedy
Members suznu Posted May 5, 2015 Members Report Posted May 5, 2015 Hey psst,just a little secret,shhh,they're basically both the same machine,just painted a different color.They are made in the same factory. At least that's what I've been told. Where they may vary is Cowboy has stainless pressure feet,accessories,not sure about artisan. I have a cowboy 4500,it's the daddy of em all, and by the way I LOVE my Cowboy, I would personally go for the machine that offers the best tech support . Plus I would bet those guys at Neels saddlery or Toledo (contact info at top of page) would help you with any questions you may have,now,or down the road. Maybe you could contact them and find out what makes each machine stand out once it gets to the dealership. I know they do a lot of tweaking and adjusting once they arrive to the states and they stand by they're products long after the sale. Also if you have to have it shipped,which machine would offer the best shipping costs. It's always hard to make these decisions when you know your going to be spending a lot of time with your machine and it is a big investment. So I wish you the best. Quote
Moderator Art Posted May 5, 2015 Moderator Report Posted May 5, 2015 Hi Gary, I think you would be in better shape if you bought something like the CB4500 because of the longer arm. Since you are in OH, Bob Kovar at Toledo Sewing Machine is probably your best bet. Sewing gunbelt bullet loops with a shorter arm machine will make you wish you had spent the few extra bucks. You can spend a little more on the bigger machine because it is a lifetime investment. I have Artisan, Cowboy, and Cobra machines, and none of them were made in the ole U.S.A.; however some of my Singers (well a few) were. It really doesn't matter much as long as they work and can be fixed if they break. Simple stuff like timing and hooks you should learn to fix yourself. If you aren't mechanically inclined, live close to your dealer, he may teach you some of the simple stuff so he doesn't have to see you so often. Have fun with your new machine, you will probably want to sew everything that's not nailed down. Art Quote For heaven's sakes pilgrim, make yourself a strop!
Members Gregg From Keystone Sewing Posted May 5, 2015 Members Report Posted May 5, 2015 By fault of nobody, I sometimes feel like people are walking into a pizza place and asking if anybody can point them in the direction to where they can find a good slice of pizza! Just how it goes sometimes I guess. Quote Industrial sewing and cutting, parts sales and service, family owned since 1977, Philadelphia, Pennsylvania USA, 215/922.6900 info@keysew.com www.keysew.com
Cobra Steve Posted May 5, 2015 Report Posted May 5, 2015 Hi Gary. You should call all of the advertisers on this sight and get all of the info you can on the machine that you are interested in. We all have good reputations and will give our knowledge freely. Quote Thank You Steve Tayrien Leather Machine Co., Inc. 2141 E. Philadelphia St. Unit "U" Ontario, California 91761 1-866-962-9880 http://www.leathermachineco.com cobra@leathermachineco.com
Members GaryNunn Posted May 5, 2015 Author Members Report Posted May 5, 2015 Gregg, I would say it's more like walking into a pizza place and asking which of their specialty pizzas is best. Quote _____________________________________________ Only those who dare to fail greatly can ever achieve greatly. ~ Robert F. Kennedy
Members Singermania Posted May 5, 2015 Members Report Posted May 5, 2015 HI, I'm Steve Bonnett of Steve's Leather Machines and Cowboy Leather Machines in Australia and can recommend either machine you mentioned. Naturally we are biased towards the Cowboy because we have taken over the distributorship and the mother company is very very helpful, this makes for much easier backup to the end user. As mentioned above the longer arm of the Cb4500 is a bonus as is the increased sewing thickness at your disposal. Here is Australia pre service and after service backup are the holy grail, since taking over the distributorship 2 months ago we have doubled the turnover of the previous distributor's previous 12 months. This is all down to the service and reputation.... as the product is the same. I believe that whichever brand you choose and whichever model your choose..ie CB3200 or CB4500 you will be pleased with the result. Best Regards Steve Bonnett, Steve's Leather Machines and Cowboy Leather Machines Australia. Correction, clearly my maths isn't so good, just got corrected by my partner, the turnover has more than tripled in a sixth of the time. Quote
Members Gump Posted May 7, 2015 Members Report Posted May 7, 2015 The Cowboy 3200 has a 10.5" arm and 1/2" capacity. The Toro 3200 has a 12" arm and 7/8" capacity. Both have stainless feet and will handle 415 thread. The Toro is a 441 clone, and except for arm length is the same basic machine as the Cobra, Cowboy, and Techsew machines, with most parts being interchangeable. New ,the Toro machine is about $600-$700 more than the Cobra 3200, which is not the same as the Toro 3200. Quote
Contributing Member JLSleather Posted May 7, 2015 Contributing Member Report Posted May 7, 2015 What about a manual? Any of them come with one? Or, are you comfortable having someone explain setting the timing over the phone -- no pictures? These things might cause a guy to think about a machine from someone in the area you will have and use it. If you are unsure of the machine you need, stew on it a bit more. Ask the opinions of someone NOT trying to sell you one. Art has offered some pretty good advice. Only thing I might add -- if you aren't sure you'll need to sew more than 1/2", then it helps to decide. But if you KNOW that 1/2" is the limit for what you sew, then buying 'more' machine is not a good idea. I mean, say I'm outta milk and need to get to the store. I could go buy a Porsche, which would do the job, but I'd be spending far more than I need to - unnecessary. Well, maybe that's not quite the example. Perhaps the cowboy and artisan are more like Chevy, and the "Porsche" would say Adler? Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members Singermania Posted May 7, 2015 Members Report Posted May 7, 2015 Please note we are in Australia and are NOT trying to sell you a machine.... I believe all machines come with manuals. If you are technically minded you could possibly tackle the timing yourself, however bear in mind there are 3 adjustments at the back of the machine and one at the front and upsetting one can mess you up in other areas. You might also run into warranty problems if you mess around too much as well. Be wary of long complex instruction on how to rectify problems on this site, when most problems are simply tension related. I don't agree entirely on the theory that bigger is not always better, with the CB4500 ie the 441 style machine, it is bigger, it will sew thicker but it is not heavier or clumsier in the needle and foot area, they have quite a dainty foot set and will sew anything from medium harness right down to a wallet. As everyone has mentioned all the machines are similar, so its best to choose the one with best backup..... I haven't heard any bad remarks about any of the US dealers. I mention my situation in the above post so that people realise who I am, dealer or not I still try to give fair comment. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.