wmartin636 Report post Posted May 31, 2015 I can handle mold of my stitching freehand, but sometimes it needs to be held, like this double layer 9 oz stiff chrome tanned. Not having a pony, I scrounged around the shop and came up with this solution. Yes, the thread get caught in the handles, but after the third time you learn to drape it carefully. Quote Share this post Link to post Share on other sites
JamesR Report post Posted May 31, 2015 I like it! You could slide flexible tubing over the ends of the handles when in use to prevent the thread from getting caught up. That clamp has potential. I used the hardware of that clamp to make my stitching horse. A lot of stitching ponies are quite flimsy. That clamp is anything but flimsy. You could also put a hinge across the bottom and remove the top screw which would give you a deeper throat. Jim Quote Share this post Link to post Share on other sites
snubbyfan Report post Posted June 30, 2015 I like it. Good idea for a portable table top stitchin' pony. The clamps can be useful for other things as well. Quote Share this post Link to post Share on other sites
msdeluca Report post Posted July 1, 2015 Like it a lot... simple... effective... Quote Share this post Link to post Share on other sites
Otto6294 Report post Posted July 2, 2015 That will get it done. Quote Share this post Link to post Share on other sites
