Singer 45K Accessories

[hyttogpine]

Yes that is your swing guide hyttogpine, it screws on the arm of your machine

I didn't find the screw for montage. Is it a part you have in dubblett ?

Or do you know any identification. Perhaps in UNC or UNF and pitch of the screw ?

I begin to get a feeling of Singer, Phaff and Adler quite often use the same screws.

[jimi]

Do you have the oil box on your machine? if so it is the same thread as the one on your oil box. sorry no doubles, i also have a screw there that is not the same thread but is enough to hold it on. Nº is SS42 "oil box stud screw set screw"

[shoepatcher]

Jimi,

I finally found my Singer special screws, nuts, rollers and studs book I bought from England may years ago. book. The SS# 42 screw is a screw about 1" long with a Philister head on it. The thread dia. and pitch is 15/64" x 28 TPI. Tap number is #548. Juki makes screws with that dia. and pitch. Hope that helps.

glenn

[jimi]

Very kind of you Glenn, maybe hyttogpine could find a juki one for his swing guide. could you tell me the name of the book you have glenn? that will be one on my list. regards jimi.

[shoepatcher]

Jimi,

Juki screw # SS-7150940- SP would be a good number to replace the Singer SS42 screw with should you need one.

glenn

[Darren Brosowski]

If you need new bits I can help as I have been sourcing new parts from all over the world.

http://stores.ebay.com.au/Able-Sewing/Singer-45K-/_i.html?_fsub=4575201015&_sid=47422815&_trksid=p4634.c0.m322