Contributing Member JLSleather Posted June 9, 2015 Contributing Member Report Posted June 9, 2015 Downloadable holster patterns moving to jlsleather.com/ Still more in the works. Paypal ready, no 'subscription' required Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted June 11, 2015 Author Contributing Member Report Posted June 11, 2015 (edited) AND.. don't nunya go tryina make this fit anything but a P938 magazine (single stack 9mm, x 7). Single stack 9 mag pouch Edited June 11, 2015 by JLSleather Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members TexasJack Posted June 12, 2015 Members Report Posted June 12, 2015 (edited) I see what you did there! Edited June 12, 2015 by TexasJack Quote
Contributing Member JLSleather Posted June 14, 2015 Author Contributing Member Report Posted June 14, 2015 That mag carrier holds the single stack '9' from Sig. I see ads and postings saying pouches fit "single stack this" or "double stack that". Keep in mind these are NOT interchangeable. While some patterns may allow the forming of more than one model, not all mags of the same caliber are the same. This isn't any big secret, but it does seem that at least some are misled by bad info "going around". Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
splinters Posted June 15, 2015 Report Posted June 15, 2015 Any plans for the S&W revolver N frame for the model 625 for example? Quote
Contributing Member JLSleather Posted June 15, 2015 Author Contributing Member Report Posted June 15, 2015 Yeah, I'd like to get back to the revolvers -- those are always fun. Guess I'll order the "dummy".. that guy down the hill with the 629 aint been around ... Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted June 19, 2015 Author Contributing Member Report Posted June 19, 2015 Whatcha think.. $3 too much for a mag pouch pattern? Tha's like $1 fer the front, $1 fer the back, and $.95 fer the instructions. 5¢ gits ya enough thread to do it, but you'd still need a chunk o leather .... Oh, long as I'm here, might could throw up a picture of the mag that pattern spits out. Just to be sure, i made a holster ta go with it Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted June 20, 2015 Author Contributing Member Report Posted June 20, 2015 OOPSsie. Hey, it's what Mom always says ... Somebody pointed out that I forgot the 'instructions' on the free magazine pouch pattern (gasp!), so here it is. This is 'cookie cutter' instruction that goes with all of 'em -- but then it's a digital page with each file, so just don't print it if you don't need it. Mag_Instr.pdf Bad news, it doubles the cost of the file. Good news is -- free x2 still aint bad Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members tnhomestead Posted June 29, 2015 Members Report Posted June 29, 2015 Thanks fer the pattern, I promise I wont try and make it fit my ol Ruger P85, cough cough! Quote
Contributing Member JLSleather Posted July 6, 2015 Author Contributing Member Report Posted July 6, 2015 Yes, I know not all the mags are identical, but - seriously - they're so close I'm sure you can figure it out from there. "Officially", the link is to a "holster" for the Glock 19 9mm mag, but easy enough to adapt it to a 23, or a 32, or .... http://www.jlsleather.com/wp-content/uploads/2015/07/Mag_Gk19_P01.pdf Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.