Contributing Member JLSleather Posted September 21, 2015 Author Contributing Member Report Posted September 21, 2015 Here my intial build from your pattern. I had to make some alteration, because I only had a 4.25" to use as a mold. It's a little rough around the edges still. Next one I'll adjustthe stitchline out a little and trim the end down a bit. Any suggestions you have are very welcome. Thanks ChasM Looks like your stitch line around the panel might have crept in a bit - or maybe that's just the angle of the pic. Looking pretty good. Quote
Members chasman52 Posted September 21, 2015 Members Report Posted September 21, 2015 Looks like your stitch line around the panel might have crept in a bit - or maybe that's just the angle of the pic. Looking pretty good. Thank you, I think you are right about the panel stitch. The next one will come out much better sans the Caiman. Quote
Contributing Member JLSleather Posted October 3, 2015 Author Contributing Member Report Posted October 3, 2015 Broke 700 downloads. Jus sayin' Quote
Contributing Member JLSleather Posted October 15, 2015 Author Contributing Member Report Posted October 15, 2015 Downloads at 850 .. but that's just for the 2 variations of 1911's. Quote
Members glockanator Posted October 16, 2015 Members Report Posted October 16, 2015 Will your Glock avenger pattern work with the G22/23 or even the G21/30? Quote
Contributing Member JLSleather Posted October 16, 2015 Author Contributing Member Report Posted October 16, 2015 (edited) Will your Glock avenger pattern work with the G22/23 or even the G21/30? Yep, should be fine as long as you realize that the 22 is about half an inch LONGER than the 23 (well-- like 13 mm I think). The 23 WILL work. The 22 will protrude out the end unless you extend it. The 21, I don't honestly know Edited October 16, 2015 by JLSleather Quote
Members glockanator Posted October 16, 2015 Members Report Posted October 16, 2015 Yep, should be fine as long as you realize that the 22 is about half an inch LONGER than the 23 (well-- like 13 mm I think). The 23 WILL work. The 22 will protrude out the end unless you extend it. The 21, I don't honestly know Thanks Quote
Contributing Member JLSleather Posted October 18, 2015 Author Contributing Member Report Posted October 18, 2015 Downloads at 850 .. but that's just for the 2 variations of 1911's. Over 900 Probably more than 25 of them from here Quote
Members Double Daddy Posted October 20, 2015 Members Report Posted October 20, 2015 JLS, Here are a couple of pieces I built for a buddy last year, using patterns I purchased from you (S&W MP and 1911 Commander)...the patterns were easy to follow...turned out not too bad for an amateur like myself. Thanks for extending your expertise and resources our way! Chris Quote
Contributing Member JLSleather Posted October 20, 2015 Author Contributing Member Report Posted October 20, 2015 Thanks - always like seein' what others came up with from 'em. Looks good (I've always liked that contrasting stitch!). Quote
Members tclaridge Posted October 24, 2015 Members Report Posted October 24, 2015 (edited) I was fortunate enough to find your great pattern as well. This is my first leather holster project-- the pattern was perfect! Thanks for providing it! Edited October 24, 2015 by tclaridge Quote
Contributing Member JLSleather Posted October 24, 2015 Author Contributing Member Report Posted October 24, 2015 This is my first leather holster project- nice colors .. stitchin' lookin' good too! I can tell you my first holster didn't look nearly as trim as yours Quote
Contributing Member JLSleather Posted October 27, 2015 Author Contributing Member Report Posted October 27, 2015 Shucks .. 1000 downloads of the 1911 patterns. S'pose that means i gonna hafta upload sumthin newta work on! Quote
Members jstar61 Posted October 28, 2015 Members Report Posted October 28, 2015 Just downloaded a couple of your patterns. Much appreciated. Quote
Contributing Member JLSleather Posted October 29, 2015 Author Contributing Member Report Posted October 29, 2015 Welcome! Don't forget the Glock G42 magazine pouch just put up Quote
Members Jarhead44706 Posted November 10, 2015 Members Report Posted November 10, 2015 (edited) Just finished a couple of them Also would like to add a huge thanks for supplying so many patterns. Edited November 10, 2015 by Jarhead44706 Quote
Members jstar61 Posted November 11, 2015 Members Report Posted November 11, 2015 Used your Glock 17 mag holster pattern to make one for a H&K VP9 mag. Had to extend the top 1/4" to fit the VP9 mag. Great pattern. Thanks again. I am currently attempting to use the same pattern to make a 2 mag holder for my Glock 26. Quote
Members Pdinkle Posted November 11, 2015 Members Report Posted November 11, 2015 Im looking for a holster pattern for a Rohm 38sp. Can anybody help me??? Quote
Contributing Member JLSleather Posted November 16, 2015 Author Contributing Member Report Posted November 16, 2015 Used your Glock 17 mag holster pattern to make one for a H&K VP9 mag. Had to extend the top 1/4" to fit the VP9 mag. Great pattern. Thanks again. I am currently attempting to use the same pattern to make a 2 mag holder for my Glock 26. Good to see folks alterin' 'em ta suit their needs! Thanks for the pics, too! Somebody noticed the G43 avenger wasn't up and ready! Only been in my computer for about 7- 8 months now! G43 Avenger download now up (sorry 'bout that ) Quote
Members chapman Posted November 20, 2015 Members Report Posted November 20, 2015 Just down loaded a couple of your patterns much appreciated and will post them when I finish Thank You JLS.... Quote
Contributing Member JLSleather Posted November 20, 2015 Author Contributing Member Report Posted November 20, 2015 Welcome... and thanks for the shout! Quote
Contributing Member JLSleather Posted December 2, 2015 Author Contributing Member Report Posted December 2, 2015 FREE download for the pattern, makes the 1911 single stack mag pouch available now. The pre-cut leather to make these is available in an etsy store. Quote
Contributing Member JLSleather Posted December 5, 2015 Author Contributing Member Report Posted December 5, 2015 I'm quitting shortly... two more orders to get through.. and a long over due break! So, this will be you folks' problem for a while. Just to get you started, here's a quick 'n' dirty pattern to give you something to do for now. Yes, I know I could put it on the web site, but honestly can't be bothered at the moment MP425_P1.pdf Quote
Members JohnnyDingus Posted December 6, 2015 Members Report Posted December 6, 2015 (edited) Thank you for offering all these patterns for free to the leather working community. You show a lot of class and I for one really appreciate it. It is hard enough to learn and make your own patterns but it is so great when you can get a helping hand to start making quality holsters. Thank you very much Jeff you are a Class Act! Johnny Dingus Edited December 6, 2015 by JohnnyDingus Quote
Contributing Member JLSleather Posted December 6, 2015 Author Contributing Member Report Posted December 6, 2015 Welcome, Johnny! Maybe summa you boys kin improve on 'em and/or adapt them to other models Hopefully with a little sharing info, we'll all get a little better! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.