Members eternoui Posted August 5, 2015 Members Report Posted August 5, 2015 (edited) Hi guys I receive my leather today, double shoulder veg tan of 1mm approximately. This is my first leather and.I would like some comments on it. For some reason i didnt like it. Regards Demetris Edited August 5, 2015 by eternoui Quote
Members smirak Posted August 5, 2015 Members Report Posted August 5, 2015 Might want to be a little more specific about what you didn't like? From that one picture, it looks like standard ole veg tan leather. Quote
Members eternoui Posted August 5, 2015 Author Members Report Posted August 5, 2015 Hi there smirac. Sorry for not be specific, its my first piece of leather. I was waiting the outside side to be smoother (as you see the.image i mean the outside).i asked your opinion because i dont know how it should be. Quote
electrathon Posted August 5, 2015 Report Posted August 5, 2015 If you mean the edge, that is not uncommon. You are going to cut it off, so not an issue. Quote
Members smirak Posted August 5, 2015 Members Report Posted August 5, 2015 If you're talking about the "fuzzy" side, then yes, that's normal. Some leathers will have more "fuzz" and some less. Quote
Members eternoui Posted August 5, 2015 Author Members Report Posted August 5, 2015 Hi there electrathon thank you for the reply. I am talking about the "fuzzy" side as smirak said. What technique you use to make it smoother? Quote
Members grmnsplx Posted August 5, 2015 Members Report Posted August 5, 2015 Eternoui, What do you plan on making? That's a good place to start. You can : 1. Do nothing and leave it as it is. 2. Give it a coat of gum tragacanth or the synthetic japanese stuff (tokunol??). The Japanese stuff is better I think. I have seen people use Tan Kote (Ian Atkinson does that), but I am not sure how good it actually works. 3. Cover it with another piece of leather . A think lining leather like pig might suit your purpose, depending on what that is. If you are making wallets, you could also apply a layer of fabric. Quote
mlapaglia Posted August 5, 2015 Report Posted August 5, 2015 You can also buy more expensive leather from Herman Oak or one of the other high quality leather tanneries. What you have looks like a standard piece of grade c Tandy leather. Very normal in inexpensive leather. Quote
Members eternoui Posted August 6, 2015 Author Members Report Posted August 6, 2015 hi there mlapaglia, the problem is not buying a more expensive and high quality leather, the problem is finding a seller that send it to my country and to not charge for shipping twice as the leather. Quote
mlapaglia Posted August 6, 2015 Report Posted August 6, 2015 hi there mlapaglia, the problem is not buying a more expensive and high quality leather, the problem is finding a seller that send it to my country and to not charge for shipping twice as the leather. Where do you live? Someone here may have an idea on where to get leather that wont cost so much with shipping. But perhaps not. It all depends on where you are. For leather like that where the back side will show I apply gum tragacanth to the back and then use a flat edge to smooth the back side. It works well unless your back side of the leather looks like a shag carpet. Then you might consider sanding the back side first. Quote
Members eternoui Posted August 6, 2015 Author Members Report Posted August 6, 2015 Hi there I live at Cyprus. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.