Which Machine

[George3]

Hello everyone,

Im looking to buy a new or used machine for sewing canvas, heavy cordura and such. I have a Adler 205-370 and its a pain to reset the machine every time you need to switch to a much lighter thread.

I'm looking at the Juki DNU1541, Consew 206RB and the Consew Premier P1206RB.

they all look good and from what I gather The Juki is most likely the best choice even though the Consew Premier looks like a good value.

My concern with the P1206 Premier would be the automatic oiler at slow speeds.

Any help would be appreciated.

thanks in advance,

George

Unionlevelleather.com

[paprhangr]

I sew leather and waxed canvas with my consew 206 RB5 no problem.

[Colt W Knight]

No experience with the other machines, but the consew 206 will sew through canvas and cordura like butter.

There was a long thread not long ago about the other consew and being able to oil at slow speeds. Folks with experience with the machine said sewing slow wasn't an issue.

Edited November 27, 2015 by Colt W Knight

[pcox]

my 1206 oils fine at slow speed.

[Wizcrafts]

my 1206 oils fine at slow speed.

Can you verify that oil flows all the way to the ends of the wicks? Are the crankshafts inside the head getting oil from the pump system? What speed range do you usually sew at (stitches per second or per minute)?

[George3]

Hey Wiz,

I'm leaning towards the Juki, the Consew's start at about $1000 to $1400 and the Juki is around $1500, In for a penny, in for a pound!

I like the fact that the Juki is made in Japan rather than China appeals to me.

The Premier series seems to be made for a price point, I'm sure it's a great machine, but?

I need a machine for sewing multiple layers of Canvas, Light leather and Cordura.

Do you have any suggestions on another model that might serve me well?

What do you think of the new Consew 206RB 5?

Thanks again for all you knowledge it's been helpful.

George

unionlevelleather

[SARK9]

Since you are also open to a *used* machine, don't overlook the Japanese-made offerings such as the older Consew 206RB* as well. There are several makes and models of "classic" walking foot machines in this general class, by Singer, Seiko, Brother, Mitsubishi, Juki, Nakajima and others, as well as excellent first class machines from Pfaff, Durkop/Adler etc. All will serve well for anything under 3/8" of Cordura and webbing, and generally handle thread sizes from T45 to T135, with many able to handle T210. Expect to pay more for the less commonly available accessories for the German machines.....the most bang for the buck is found with machines that share some comparability with the Singer 111w family. A good example of any of these machines, treated with respect, will last a generation.

My Chinese-made 206RB-5 has been problem-free to date, and seems quite mannerly. I would personally lean towards the new Juki if my budget allowed.

-DC

[pcox]

Wiz, yes, the oil has the wicks wet in the head and I can see oil in the clear tube that oils the bottom part of the head. I sew as slow as 2 stitches a second. but very seldom faster than the lowest setting on the servo. There is a simple little by pass valve on the pump and it is completely closed for slow speed sewing. This needs to be opened up to about 1/2 if you sew faster as it will over oil everything. the hook lube is adjustable. The external walking foot cranks still need to be oiled by hand. I have 2 other pumpers that do not oil well at slower speeds but the 1206 oils well at very low speed. Most of the main shafts are hollow and have felt plugs in the ends. if you touch them you get oil on your finger. I know this is not in line with your experience of pumpers but this one seems to work at slow speed.

[Union Level Leather]

Since you are also open to a *used* machine, don't overlook the Japanese-made offerings such as the older Consew 206RB* as well. There are several makes and models of "classic" walking foot machines in this general class, by Singer, Seiko, Brother, Mitsubishi, Juki, Nakajima and others, as well as excellent first class machines from Pfaff, Durkop/Adler etc. All will serve well for anything under 3/8" of Cordura and webbing, and generally handle thread sizes from T45 to T135, with many able to handle T210. Expect to pay more for the less commonly available accessories for the German machines.....the most bang for the buck is found with machines that share some comparability with the Singer 111w family. A good example of any of these machines, treated with respect, will last a generation.

My Chinese-made 206RB-5 has been problem-free to date, and seems quite mannerly. I would personally lean towards the new Juki if my budget allowed.

Thanks for the input DC, I'm leaning towards the Juki, buy the right one the first time!

As you well know there are not many bargains out there, I watch Craig's list just about every day and hen you do find one they are in the 6-9 hundred dollar range, so, might as well buy new.

I started sewing with a cowboy and it was a good machine with spectacular support.

I sold that and bought a Durkopp 205-370 and never looked back!

So, I'll most likely get the Juki, just looking for the "right price "

I'm in Union Level Va right outside of South Hill, sort of your neighbor

-DC

[Wizcrafts]

Wiz, yes, the oil has the wicks wet in the head and I can see oil in the clear tube that oils the bottom part of the head. I sew as slow as 2 stitches a second. but very seldom faster than the lowest setting on the servo. There is a simple little by pass valve on the pump and it is completely closed for slow speed sewing. This needs to be opened up to about 1/2 if you sew faster as it will over oil everything. the hook lube is adjustable. The external walking foot cranks still need to be oiled by hand. I have 2 other pumpers that do not oil well at slower speeds but the 1206 oils well at very low speed. Most of the main shafts are hollow and have felt plugs in the ends. if you touch them you get oil on your finger. I know this is not in line with your experience of pumpers but this one seems to work at slow speed.

This is valuable information. Thanks for posting it. Perhaps other manufacturers will eventually upgrade their self-oilers to pump at slow speeds. I guess it would be a good idea if the oil flow adjuster is external and labeled (more/less, or slow/fast), rather than hidden on the bottom. Is yours under or on the outside of the machine?