Members dfrensdorff Posted January 13, 2016 Author Members Report Posted January 13, 2016 Thanks Gents..........I guess I am in the market for an airbrush.........not that I've ever needed much of an excuse to buy a new tool...... Quote
Members jrny4wrd Posted January 13, 2016 Members Report Posted January 13, 2016 If all you want is a fade you dont need an airbrush. Start at the edge and go all the way around with the dye on a sponge or fabric. As the dye lightens move towards the middle and press down lighter. You can also just put dye on the sponge or towel, wipe it on some card board until it fades and slowly use it from edge to center. If all you want is a fade you dont need an airbrush. Start at the edge and go all the way around with the dye on a sponge or fabric. As the dye lightens move towards the middle and press down lighter. You can also just put dye on the sponge or towel, wipe it on some card board until it fades and slowly use it from edge to center. Quote
Members Colt W Knight Posted January 13, 2016 Members Report Posted January 13, 2016 I use an airbrush to do what you are talking about. I never had much luck dying evenly with a sponge or rag. Quote
Members Widget Posted January 13, 2016 Members Report Posted January 13, 2016 I may be really misunderstanding what you're after...but if not, give block dying a try. There's a good tutorial here (and you can see the finished result in the first 5 seconds of the video so if it's not what you're after, no time wasted). Quote
Members dfrensdorff Posted January 14, 2016 Author Members Report Posted January 14, 2016 I may be really misunderstanding what you're after...but if not, give block dying a try. There's a good tutorial here (and you can see the finished result in the first 5 seconds of the video so if it's not what you're after, no time wasted) Thank you.......that is basically what I am after, especially when only the edge is block dyed and the middle stays natural.....I will give it a try, but still would like to try the airbrush.......thanks again......Don Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.