Where Can I Get A Handle For This Stamp?

[BeUnico]

I'm in love with this beautiful unicorn Midas stamp, I've been told it's out of production.

Where can I get a handle for this online?

It has a 1cm plain, circular opening on top.

Thanks in advance

[HondoMan]

BeUnico, look at either die ledermacher.de or lederkram or rickert werkzeug. All are great websites I use. They will probably have what you're seeking, posting will be less expensive than from America and relatively fast from Germany.

[Thor]

Check the saddlery section on eBay Italy first. Other than that you'll find it here https://www.rickert-werkzeug.de/de/Punzen-Stempel/Zubehoer

[BeUnico]

Thank you Hondoman and Thor. I don't seem to find

much from Italian sellers but I'll try that first.

Thanks for the links x

[Studio-N]

Is the back of the stamp flat? If so make your own. My first handle was made from a 6" piece of pipe threaded on both ends.

I used two brass caps with flat tops - one to pound and one to attach the stamp using double faced tape. Worked great.

I still have it. see attachment.

[BeUnico]

👍🏼

Edited February 28, 2016 by BeUnico

[BeUnico]

The back is in the photo attached. That's an idea that didn't dawn on me... Could get my OH to sort out something similar for me. Thanks!

[TheModifier]

  On 2/28/2016 at 7:04 PM, BeUnico said:

The back is in the photo attached. That's an idea that didn't dawn on me... Could get my OH to sort out something similar for me. Thanks!

Try HERE

[lonesome dove]

A Tandy hefty handle will fit that stamp. I have ordered online from this company before. http://www.ivan.tw/index.php?route=product/product&cid=12. Or take a piece of pipe and cut the end like the end shown so the notches in the pipe fit over the supports bracing the circle. http://www.ivan.tw/index.php?route=product/product/detail&id=10618

[BeUnico]

Thank you all for the help 👍🏼😊