BeUnico Report post Posted February 28, 2016 I'm in love with this beautiful unicorn Midas stamp, I've been told it's out of production. Where can I get a handle for this online? It has a 1cm plain, circular opening on top. Thanks in advance Quote Share this post Link to post Share on other sites
HondoMan Report post Posted February 28, 2016 BeUnico, look at either die ledermacher.de or lederkram or rickert werkzeug. All are great websites I use. They will probably have what you're seeking, posting will be less expensive than from America and relatively fast from Germany. Quote Share this post Link to post Share on other sites
Thor Report post Posted February 28, 2016 Check the saddlery section on eBay Italy first. Other than that you'll find it here https://www.rickert-werkzeug.de/de/Punzen-Stempel/Zubehoer Quote Share this post Link to post Share on other sites
BeUnico Report post Posted February 28, 2016 Thank you Hondoman and Thor. I don't seem to find much from Italian sellers but I'll try that first. Thanks for the links x Quote Share this post Link to post Share on other sites
Studio-N Report post Posted February 28, 2016 Is the back of the stamp flat? If so make your own. My first handle was made from a 6" piece of pipe threaded on both ends. I used two brass caps with flat tops - one to pound and one to attach the stamp using double faced tape. Worked great. I still have it. see attachment. Quote Share this post Link to post Share on other sites
BeUnico Report post Posted February 28, 2016 (edited) 👍🏼 Edited February 28, 2016 by BeUnico Quote Share this post Link to post Share on other sites
BeUnico Report post Posted February 28, 2016 The back is in the photo attached. That's an idea that didn't dawn on me... Could get my OH to sort out something similar for me. Thanks! Quote Share this post Link to post Share on other sites
TheModifier Report post Posted February 28, 2016 The back is in the photo attached. That's an idea that didn't dawn on me... Could get my OH to sort out something similar for me. Thanks! Try HERE Quote Share this post Link to post Share on other sites
lonesome dove Report post Posted February 28, 2016 A Tandy hefty handle will fit that stamp. I have ordered online from this company before. http://www.ivan.tw/index.php?route=product/product&cid=12. Or take a piece of pipe and cut the end like the end shown so the notches in the pipe fit over the supports bracing the circle. http://www.ivan.tw/index.php?route=product/product/detail&id=10618 Quote Share this post Link to post Share on other sites
BeUnico Report post Posted February 29, 2016 Thank you all for the help 👍🏼😊 Quote Share this post Link to post Share on other sites
