indidana Posted June 15, 2016 Report Posted June 15, 2016 Hi! A guy wants me to make him a belt with this skull buckle. (pic attached) Do I make it the same as I would with a regular buckle? I think I remember reading somewhere that with these different style buckles you have to measure the belt differently. Help! Quote
Members 5shot Posted June 15, 2016 Members Report Posted June 15, 2016 Have him send the buckle so you can get the measurement correct. You also don't need a slot for the tongue. Quote
indidana Posted June 15, 2016 Author Report Posted June 15, 2016 I'll be buying the buckle so I can get it whenever. But does the way I make the belt change, as far as measuring it from the button stud instead of the prong, to the center hole? Quote
Contributing Member JLSleather Posted June 15, 2016 Contributing Member Report Posted June 15, 2016 Does this help? Go down to the part about buckle type and size stufff http://www.jlsleather.com/diy/belt-info/ Quote
indidana Posted June 15, 2016 Author Report Posted June 15, 2016 1 hour ago, JLSleather said: Does this help? Go down to the part about buckle type and size stufff http://www.jlsleather.com/diy/belt-info/ This is one of the things I was looking for! It needs to be pinned to the belt forum! Many thanks! Quote
Contributing Member JLSleather Posted June 16, 2016 Contributing Member Report Posted June 16, 2016 I think you'll find that a bookmark is much more useful Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.