indidana Report post Posted June 15, 2016 Hi! A guy wants me to make him a belt with this skull buckle. (pic attached) Do I make it the same as I would with a regular buckle? I think I remember reading somewhere that with these different style buckles you have to measure the belt differently. Help! Quote Share this post Link to post Share on other sites
5shot Report post Posted June 15, 2016 Have him send the buckle so you can get the measurement correct. You also don't need a slot for the tongue. Quote Share this post Link to post Share on other sites
indidana Report post Posted June 15, 2016 I'll be buying the buckle so I can get it whenever. But does the way I make the belt change, as far as measuring it from the button stud instead of the prong, to the center hole? Quote Share this post Link to post Share on other sites
JLSleather Report post Posted June 15, 2016 Does this help? Go down to the part about buckle type and size stufff http://www.jlsleather.com/diy/belt-info/ Quote Share this post Link to post Share on other sites
indidana Report post Posted June 15, 2016 1 hour ago, JLSleather said: Does this help? Go down to the part about buckle type and size stufff http://www.jlsleather.com/diy/belt-info/ This is one of the things I was looking for! It needs to be pinned to the belt forum! Many thanks! Quote Share this post Link to post Share on other sites
JLSleather Report post Posted June 16, 2016 I think you'll find that a bookmark is much more useful Quote Share this post Link to post Share on other sites
