Jump to content

Recommended Posts

  • Members
Posted

Dose someone know how they do the "rolled leather" ?

A customer wants me to make a rolled leather dog collar & lead.

Here is a photo of what he wants.

I have an idea, but I need to know the steps of how it's done.

d_h_rolled_leather_collar_and_lead_set_tan_3.png

  • Members
Posted

ive seen tubing inserted, sort of leather goes around the tube if that makes any sense

  • Members
Posted

I think there is a tutorial somewhere on the forum on how to make "rounds" which is the correct name for them. The above example is a cop-out, in my opinion. They have taken a thin piece of leather and sewn it around a length of cord or rope. The "correct" or traditional way involves quite a few more steps and is far superior to the above example. However, it is quite time consuming and difficult to be compensated for one's time.  Another method, still superior to the above, but not considered acceptable by top harness makers, is to slit lengthwise the portion of the strap that you wish to round, fold and sew one layer atop the other, and then proceed with the rounding process. Here are a couple links to topics in which rounds were discussed, however, I couldn't find the one that I was thinking of.  Al Stohlman's book The Art of Handsewing Leather has instructions on how to make the traditional round by hand.
http://leatherworker.net/forum/topic/63305-rolled-headstall/?do=findComment&comment=414267

http://leatherworker.net/forum/topic/60222-can-you-spot-real-rolled-leatherwork/?do=findComment&comment=388534

 

  • Members
Posted

I use the method in the Stohlman book and it works very well. I had to make my own rein rounder out of oak rather than buy a metal one but once you get the sewing done the rounding can be accomplished in an manner of inventive ways following the spirit of the process.

rounder.jpg

"Oh my God....I beseech thee grant me the grace to remain in Thy Presence; and to this end do Thou prosper me with Thy assistance, receive all my works, and possess all my affections" Brother Lawrence c.1614-1691

plinkercases.ca

  • Members
Posted

Plinker, how do you hold the rounds for sewing? I made the little thing to go in my stitching horse as illustrated in Stohlman's book, but it only works marginally well. Most of the problem may lie in the fact that I have seen an original attachment that was manufactured for this task. I've only ever seen one, and sadly, it was not for sale. I've never been able to be satisfied with my homemade holder since seeing it.

  • Members
Posted

I did rig one up like Stohlman's and not even sure where I stashed it... haven had to make around for a while but am planning to make a new back pack for myself... I would love to see this rig you saw. Any pictures?

"Oh my God....I beseech thee grant me the grace to remain in Thy Presence; and to this end do Thou prosper me with Thy assistance, receive all my works, and possess all my affections" Brother Lawrence c.1614-1691

plinkercases.ca

  • Members
Posted

Unfortunately I have no pictures. It is a metal hinged affair that tightens when you tighten the jaws on the stitching horse.

  • 2 months later...
  • Members
Posted (edited)
On 6/24/2016 at 7:12 PM, Big Sioux Saddlery said:

I think there is a tutorial somewhere on the forum on how to make "rounds" which is the correct name for them. The above example is a cop-out, in my opinion. They have taken a thin piece of leather and sewn it around a length of cord or rope. The "correct" or traditional way involves quite a few more steps and is far superior to the above example. However, it is quite time consuming and difficult to be compensated for one's time.  Another method, still superior to the above, but not considered acceptable by top harness makers, is to slit lengthwise the portion of the strap that you wish to round, fold and sew one layer atop the other, and then proceed with the rounding process. Here are a couple links to topics in which rounds were discussed, however, I couldn't find the one that I was thinking of.  Al Stohlman's book The Art of Handsewing Leather has instructions on how to make the traditional round by hand.
http://leatherworker.net/forum/topic/63305-rolled-headstall/?do=findComment&comment=414267

http://leatherworker.net/forum/topic/60222-can-you-spot-real-rolled-leatherwork/?do=findComment&comment=388534

 

Big Sioux Saddlery,  I just got Al Stohlman's book, " The Art of Hand Sewing Leather "

I have been working with leather for over 40 years. I am going to learn some new things about sewing leather.

Thank you for the heads up. One thing, looks like I will need a rounder.

Edited by craftsman827
  • Members
Posted (edited)

You are quite welcome, Craftsman. It was one of the first books I bought many, many years ago when I moved beyond Tandy's tooling packs. I didn't have a stitching horse and couldn't find an antique one at the time, so I used the plans in the back of the book and had one made.  I still use it today. That thing is at least 30 years old. I've also made the "rounds sewing attachment" for it.  It works only moderately well.  It doesn't help that I know of a manufactured clamp to go in a stitching horse exists for sewing rounds:-)  I've only ever seen one, and it wasn't for sale. I think of it every time I sit down to sew some.  Contact Bruce Johnson for a rounder. I think he usually has some.

Edit: Ha, I see that I talked about the clamp above.  Is that obsessive? Ha ha

Edited by Big Sioux Saddlery

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...