Cobra Class 3 machine

[bikermutt07]

Thanks, I have been just researching out of curiosity and not seen it in the pictures on the sales sites. I hadn't seen them in the specs come to think of it. Or maybe I'm just nuts/confused.

[Red Cent]

The Cobra 4 has a built in bobbin winder. It works as you sew other stuff. Just to the right where it says "leather weather machine', there is a spindle on which you place the bobbin. Thread is pulled through the spring thingy to the right of the lamp. Works good. The C3 has an independent (kinda) winder but still works off the machine.

 

 

[TinkerTailor]

On 10/5/2016 at 3:31 PM, TonyRV2 said:

I did as a matter of fact look at that one, and even though its less expensive, I wasn't as impressed with the specs as compared to the Cobra 3.  I really don't mind paying the price as long as the quality is there...you know....pay once cry once.

 

They are both basically the same machine with different paint. I would phone both and see who you like to talk to on the phone better. Its also not a bad idea to choose the closest. Both will stand behind their machines and can provide all the things you need. Both have a really good reputation. Toledo will also tailor the package to what you need if there is an accessory included in the cobra package that you want. Do not pass over the cowboy machine just cause it is listed with less feet. Both Cowboy Bob and Cobra Steve are known to work with people and get them the machine they need.

Edited November 2, 2016 by TinkerTailor

[rejerome]

Talk to Bruce Cheaney.  He has a Cowboy and a Cobra 4. They are the same machine as previously stated  

I purchased my Cobra 4 from SLC which is about 400 miles from me but they're my closest dealer. 

I actually talked to Kevin just a couple of days ago. When I switched from #96 thread to #346 thread the bobbin spring was acting up. I'd not had any trouble in the past, but the thread kept jumping out of the notch in the bobbin's tension spring, or sometimes the spring would split the thread. I shot a quick video for them and tossed it up on YouTube. Kevin didn't even go look at the video after I described the problem. He said he'd send me new new bobbin tension spring ASAP.  Rusty is the real Cobra expert at SLC but was out at the time I called.  There's another young fellow there that is also pretty knowledgeable, so you can always get help if you need it  

Since they're sending me that new part I decided to perform a little percussive maintenance on mine. I tapped on the spring to bend it slightly into a tighter curve.  I fits the bobbin case better now and works like a charm. 

I think most guys will tell you that you should expect to become a sewing machine mechanic if you buy one....any brand....they all require maintenance but generally its pretty simple. 

Here are links to the videos in case anyone is interested  

Before: 

 

 

After:

 

Rex

Edited November 2, 2016 by rejerome