cdthayer Report post Posted June 7, 2017 I’ve got my Consew 226 about ready to put into use, except that I can’t figure out how to balance the forward and reverse stitch lengths. This is the older version of the 226, but I’m not sure which one. It’s not an “R” machine. The reverse stitch length is a much shorter length than the forward. Did I miss a thread where this was discussed? The Consew 226 is built differently than the Singer 111G156, so I can’t use the Singer guide. Thanks for any help. CD in Oklahoma Quote Share this post Link to post Share on other sites
Gregg From Keystone Sewing Report post Posted June 8, 2017 Consew over the life of the 226 model series had three frames. This is the earliest one, and may be from the 60s. This has the old style reverse, is what they call it, and that was a long time ago. I have books at my work computer. I'll post tomorrow. Quote Share this post Link to post Share on other sites
michaelcbarr Report post Posted April 13, 2021 I'm sure this has been sorted after 4 years but I had similar issues on my 226R and was wondering if you got to the bottom of it? Mb Quote Share this post Link to post Share on other sites
cdthayer Report post Posted April 13, 2021 Nope. Never heard another word. CD in Oklahoma Quote Share this post Link to post Share on other sites
michaelcbarr Report post Posted April 13, 2021 well if you still have the machine - try adjusting these two screws: Please let me qualify this advice by saying I know almost zero about this machine (or any other machine) but I had the exact same issue and it is the only thing I found that worked :D Mb Quote Share this post Link to post Share on other sites
cdthayer Report post Posted April 14, 2021 Ok, thanks. I'll give it a try when/if I get the machine back on the bench to fiddle with it. CD in Oklahoma Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted April 14, 2021 Turning the lower screw to the left will make reverse longer,the upper one is for forward. Quote Share this post Link to post Share on other sites
cdthayer Report post Posted April 15, 2021 Thank you all for your help. I appreciate it. CD in Oklahoma Quote Share this post Link to post Share on other sites