Members GunnyStewart Posted August 30, 2017 Members Report Posted August 30, 2017 Here are some of the holsters I've done over the years. As I go through and resize my pictures, I'll add more. Quote
Members Stetson912 Posted August 30, 2017 Members Report Posted August 30, 2017 Lot of good work Quote
Members GunnyStewart Posted August 31, 2017 Author Members Report Posted August 31, 2017 Thanks Guys Quote
Members JD62 Posted August 31, 2017 Members Report Posted August 31, 2017 I like that your stitch lines stay tight to the firearm every thing says tighter with break in. That panel on the shoulder rig is interesting, dose it help keep the swing under control with body movement? Quote
Members GunnyStewart Posted September 1, 2017 Author Members Report Posted September 1, 2017 JD62, Yes, I line it with suede so it doesn't slide around on the back/shoulder. Definitely made for under a larger or loose fitting jacket. Sometimes I'll make the belt loops for the mag pouch and holster, but this customer wanted three rigs exactly the same except that they were different pistols. All three without the belt loops. Quote
Members battlemunky Posted September 1, 2017 Members Report Posted September 1, 2017 Looks like some solid work there Gunny. I've only made one holster so far and I appreciate the effort you holster types put into it. I thought I had screwed mine up every step of the way until then end and it turned out pretty ok. Yours look clean and professional. Semper Fi! Quote
Members GunnyStewart Posted September 2, 2017 Author Members Report Posted September 2, 2017 Thanks @battlemunky. When I was stationed in Louisiana, I got a lot of practice. Quote
Members JD62 Posted September 2, 2017 Members Report Posted September 2, 2017 (edited) I've been trying to figure a way to carry . Two years ago today I had a spinal cord injury and lost the use of everything from the waste down. I've been able to slowly regain the ability to walk short distances but still need a chair much of the time. Your rig looks like it should be comfortable and hang tight enough to still run a manual wheelchair. If you don't mind I might try to copy your pattern :0) Edited September 2, 2017 by JD62 Quote
Members GunnyStewart Posted September 2, 2017 Author Members Report Posted September 2, 2017 No issues with that @JD62 You should be able to see, but the straps are all adjustable with Chicago screws. If you have any questions while you're making it, hit me up and I'll try to answer. Quote
Members Jetdoctorbox Posted September 4, 2017 Members Report Posted September 4, 2017 Good looking stuff! One of my goals is to start making a few more holsters. If they come out anything like your work I'll be one happy camper! Quote
Members GunnyStewart Posted September 4, 2017 Author Members Report Posted September 4, 2017 @Jetdoctorbox Thanks. I started out just making one for a display and they kinda took off. Good Luck. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.