Members iammoffat Posted December 5, 2017 Members Report Posted December 5, 2017 I recently started working on a Fortuna Skiving Machine, Model F. Very old and not properly taken care of. My goal was to get the machine running which it does. I have two issues with the machine belt type and size, and the bell knife will not adjust. Between my husband and myself we are very mechanically inclined and can usually fix almost anything. The issue is I have no manual for the old unit and can't seem to locate one. Does anyone have any suggestions on where I can look for proper belt diameter and length and how to take the bell knife shaft apart? Thank You in advance for any help offered. Quote
Uwe Posted December 7, 2017 Report Posted December 7, 2017 This belongs in the Leather Machinery section (http://leatherworker.net/forum/forum/222-leather-machinery/) . Perhaps one of the moderators like @Northmount can move it there. Quote
Northmount Posted December 7, 2017 Report Posted December 7, 2017 11 hours ago, Uwe said: This belongs in the Leather Machinery section (http://leatherworker.net/forum/forum/222-leather-machinery/) . Perhaps one of the moderators like @Northmount can move it there. Thanks, moved. Tom Quote
Members jimi Posted December 7, 2017 Members Report Posted December 7, 2017 You could maybe ask Constabulary on this forum, i think he has the same machine and could possibly help with the belt size if he has one on his machine. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.