Evo160K Posted March 4, 2018 Report Posted March 4, 2018 These parts are going on to a Singer 45K69. Thank you very much for any assistance you care to offer. Thank you.
Members shoepatcher Posted March 11, 2018 Members Report Posted March 11, 2018 still looking AL. I wish you luck. glenn
Evo160K Posted March 12, 2018 Author Report Posted March 12, 2018 Thanks Glenn. Yes, I'm still looking.
Members Old Coach Saddlery Posted March 13, 2018 Members Report Posted March 13, 2018 Try www.pilgrimshoemachine.com or 800-343-2202 they are located in Mass.
Evo160K Posted March 13, 2018 Author Report Posted March 13, 2018 3 hours ago, Old Coach Saddlery said: Try www.pilgrimshoemachine.com or 800-343-2202 they are located in Mass. Thank you Old Coach Saddlery.
Members Constabulary Posted April 11, 2018 Members Report Posted April 11, 2018 (edited) Al, believe it or not last night I couldn't sleep well and have been thinking of this and that and finally was thinking about some Singer parts and also about the tension stud you are looking for (men - really no other things to think about at night ) - this morning I looked ant my 132K and 133K and figured they have a very similar tension stud with short post just as the one you are looking for. The part # in the parts book is: 1110 - thread retaining screw stud Not a 100% match and I have no spare but maybe this helps Edited April 11, 2018 by Constabulary
Evo160K Posted April 12, 2018 Author Report Posted April 12, 2018 (edited) Hi Folker, "last night I couldn't sleep well " Isn't that the wife's responsibility? Folker, that part does look similar. Are you able to take some measurements and maybe figure out what the thread is? If you're suggesting taking one off of your machines, I wouldn't want you to do that., but that may give me another option in my search. If the thread diameter is larger, I can turn it down and re-thread it. Thanks a lot. Al Edited April 12, 2018 by Evo160K
Members Merlijn Posted April 30, 2018 Members Report Posted April 30, 2018 I was looking for the "pre tension" unit for my Singer 132-6 (the original was broken). I grabbed it from a old singer 66 dometic machine and it did the job, it has the same treading. I only took half of the tension unit of course.
Evo160K Posted May 1, 2018 Author Report Posted May 1, 2018 Thank you Merlijn. I'll check that out. Do you happen to have the number for the part you used?
Evo160K Posted August 21, 2018 Author Report Posted August 21, 2018 Still can't find these parts !! Any help would sure be appreciated.
Recommended Posts