Members Clintock Posted May 14, 2018 Members Report Posted May 14, 2018 Pretty sure this has been said somewhere and if it's not allowed then a mod can delete it. Just recieved my new machine Friday. So far it's doing everything it should. I'm completely new to the sewing machine world but Bob at http://www.tolindsewmach.com/ helped me tremendously. I'm not endorsed by anyone here nor do I wanna be. Just appreciate old fashioned customer service. My only problem with the machine is the light that came with it doesn't work. I let Bob know and he said he would have one on the way. It's surprising this day and time that you can find customer service like this. Thanks Bob! Quote
Contributing Member JLSleather Posted May 14, 2018 Contributing Member Report Posted May 14, 2018 Bob da man Quote
Members Clintock Posted May 14, 2018 Author Members Report Posted May 14, 2018 Well @JLSleather, you helped make my mind up in the beginning of what to get and did refer me to him. So... reckon I'll throw some credit to you too! Quote
Contributing Member JLSleather Posted May 15, 2018 Contributing Member Report Posted May 15, 2018 Know what AINT right here → or even right here ↓ ?@! PICS of all the fancy smancy stuff yer stitchin' with the new toys ... Quote
Members Clintock Posted May 16, 2018 Author Members Report Posted May 16, 2018 You might not wanna see those at the moment... still just tinkering with it on scraps. But rest assured it will be used. Hand stitching is for the birds! Quote
Members BDAZ Posted May 17, 2018 Members Report Posted May 17, 2018 I have had my 3200 since 2014 and besides a bad bearing in the flywheel, replaced by Bob immediately, I haven't had a moments down time and not one dropped stitch. Its a wonderful machine, cost effective and does everything I need. Make sue you watch a few of the "how to lubricate your 441clone" videos as it is easy to miss some critical areas. I did modify the electronics to give more range on the lowest stitching speeds. Bob Quote
CowboyBob Posted May 17, 2018 Report Posted May 17, 2018 1 hour ago, BDAZ said: I have had my 3200 since 2014 and besides a bad bearing in the flywheel, replaced by Bob immediately, I haven't had a moments down time and not one dropped stitch. Its a wonderful machine, cost effective and does everything I need. Make sue you watch a few of the "how to lubricate your 441clone" videos as it is easy to miss some critical areas. I did modify the electronics to give more range on the lowest stitching speeds. Bob Wasn't that bearing in the speed reducer? Quote
Members BDAZ Posted May 17, 2018 Members Report Posted May 17, 2018 Yes I believe it also functions as a flywheel: fly·wheel ˈflīˌ(h)wēl/ noun a heavy revolving wheel in a machine that is used to increase the machine's momentum and thereby provide greater stability or a reserve of available power during interruptions in the delivery of power to the machine. Quote
CowboyBob Posted May 17, 2018 Report Posted May 17, 2018 Hey Bob,Ok thx for the definition,your right it does have quite a bit of mass too! But to me the "flywheel" is aka the handwheel, it is quite a bit heavier & didn't want anyone to misinterpret it which one you meant! Quote
Members BDAZ Posted May 17, 2018 Members Report Posted May 17, 2018 Bob, didn't mean to appear snooty, but you are quite right. Actually I should have stated the speed reducer or the hand wheel to be accurate. Regardless, a great machine that has paid for itself many times over! Bob Quote
Contributing Member JLSleather Posted May 17, 2018 Contributing Member Report Posted May 17, 2018 On 5/15/2018 at 11:10 AM, JLSleather said: Know what AINT right here → or even right here ↓ ?@! PICS of all the fancy smancy stuff yer stitchin' with the new toys ... Quote
Members Clintock Posted May 18, 2018 Author Members Report Posted May 18, 2018 On 5/15/2018 at 7:38 PM, Clintock said: You might not wanna see those at the moment... still just tinkering with it on scraps. But rest assured it will be used. Hand stitching is for the birds! getting there. Maybe one day. Quote
Members rpicker03 Posted May 19, 2018 Members Report Posted May 19, 2018 (edited) Looking for help.. which i found this topic trying to find the help i need. Not sure it’s the same thing though. I have a bad bearing in the part that holds the rod for the flywheel between the motor and the sewing machine. Number 6205rs. I have new bearings but can anyone help me figure out how to remove them? There are two of them one on each end of the cylinder. Edited May 19, 2018 by rpicker03 Quote
Moderator Wizcrafts Posted May 19, 2018 Moderator Report Posted May 19, 2018 14 minutes ago, rpicker03 said: Looking for help.. which i found this topic trying to find the help i need. Not sure it’s the same thing though. I have a bad bearing in the part that holds the rod for the flywheel between the motor and the sewing machine. Number 6205rs. I have new bearings but can anyone help me figure out how to remove them? There are two of them one on each end of the cylinder. The flywheel usually refers to the huge hand wheel on the right end of the machine. Is this what you are asking about, or is it the speed reducer under the table that has a bad bearing? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.