Most useful sewing machine feet

[Magpieleather]

I'm going to purchase a new cowboy and was wondering if you had your choice what sewing machine feet would you pick up what have you found to be the most handy in your work such as a piping foot or other random feet you found to be handy for leather

[garypl]

21 minutes ago, Magpieleather said:

I'm going to purchase a new cowboy and was wondering if you had your choice what sewing machine feet would you pick up what have you found to be the most handy in your work such as a piping foot or other random feet you found to be handy for leather

I use the LH foot most of the time and double foot next.

Gary

[Magpieleather]

13 minutes ago, garypl said:

I use the LH foot most of the time and double foot next.

Gary

Is that a double needle or a double welting

Edited May 16, 2018 by Magpieleather

[garypl]

14 minutes ago, Magpieleather said:

Is that a double needle or a double welting

Double presser foot

[BDAZ]

I use the double 90% of the time and the left the rest on my Cowboy.

Bob

[Sonydaze]

On my 441 clone, I use the double by far the most,.  Next to that I use the RH foot. 

On my table type walking foot machines, I use the double as well. However I grind the left side down to the same width as the right side. This allows it to sew closer to obstacles. 

[RockyAussie]

21 hours ago, Magpieleather said:

I'm going to purchase a new cowboy and was wondering if you had your choice what sewing machine feet would you pick up what have you found to be the most handy in your work such as a piping foot or other random feet you found to be handy for leather

Which Cowboy sewing machine are you looking to buy and what sort of items do you want to make??

[Magpieleather]

Cb227 bags, wallets, belt pouches, and random stuff

[RockyAussie]

No trouble with feet for that one and should likely be a good choice. Takes the same feet as the Singer111W155 and for just $59.00 here's 6 feet to start with.

https://www.ebay.com/itm/SINGER-111W155-WALKING-FOOT-SET-6-FEET-with-LEFT-RIGHT-EDGE-GUIDE-/391321969217

 

[Magpieleather]

Handy thanks I picked the machine up yesterday from Toledo Industrial

[BDAZ]

Congratulations! You will have years of trouble free sewing.

Bob

[EvanBrent]

I may be too late on the draw here, but I got 45 hundred two weeks ago, and got the in line feet, double and right toe, realized I was sent the wrong one so ground my double to make a left toe only, will order another double soon enough. Bare in mind this is South Africa so things dont get delivered quickly, but my thinking, since these parts are readily available in the US is to buy a couple and see which you like using the most and which produces the best results. If you honestly dont like a certain combination, sell it on to someone who will have a use for it, there will always be someone given the popularity of the 441 clones in the USA.