Members sakuraleather Posted June 21, 2018 Members Report Posted June 21, 2018 Hi Guys, I have handmade leather goods business in Japan. I run my Juki TSC-441 leather sewing machine for over 8 years, it is great machine! The only problem of this sewing machine is the marks on underside leather by the feed dog. Recently more and more orders of vegetable tanned leather bags that cannot accept the teeth marks. Is there anybody can help me?? Thanks in advance!! I found a hand crank leather stitching machine on youtube (https://youtu.be/TGSqsUV1Abk), seems no feed dog, can avoid mark on leather? Anybody has experience with this machine? , Quote
Mark842 Posted June 21, 2018 Report Posted June 21, 2018 (edited) I run a Cobra 4, it is a Juki 441 clone. The feed dog is perfectly smooth and leaves no marks and still moves the leather fine. You might try contacting http://www.leathermachineco.com or http://www.tolindsewmach.com/cowboy.html They both are dealers for these clone machines and they may be able to tell you if the feed dog from these machines will work in yours. Edited June 22, 2018 by Mark842 Quote
Uwe Posted June 22, 2018 Report Posted June 22, 2018 (edited) Those smooth feed dogs are also available online from places like AliExpress.com. Juki probably makes them, too, and I would hope there's a Juki dealer in Japan. You can also try a needle feed throat plate and remove the feed dog entirely. Which option is best really depends on the project. I made a lower needle guide for a 441 needle feed throat plate some time ago. This video shows how this setup can work. Here's the screen shot of the AliExpress page: Edited June 22, 2018 by Uwe Quote
Members CowBoyOUTLAW Posted June 22, 2018 Members Report Posted June 22, 2018 Uwe is right, you can use smooth feed dog to improve the mark on leather, even completely remove the feed dog, by using Slotted needle plate, see below picture and linkage: http://www.cowboysew.com/saddle-makers-sewing-machine.htm Quote
Members sakuraleather Posted June 22, 2018 Author Members Report Posted June 22, 2018 22 hours ago, Mark842 said: I run a Cobra 4, it is a Juki 441 clone. The feed dog is perfectly smooth and leaves no marks and still moves the leather fine. You might try contacting http://www.leathermachineco.com or http://www.tolindsewmach.com/cowboy.html They both are dealers for these clone machines and they may be able to tell you if the feed dog from these machines will work in yours. Thanks Mark, I see the feed dog and presser foot are different from my Juki TSC-441. 21 hours ago, Uwe said: Those smooth feed dogs are also available online from places like AliExpress.com. Juki probably makes them, too, and I would hope there's a Juki dealer in Japan. You can also try a needle feed throat plate and remove the feed dog entirely. Which option is best really depends on the project. I made a lower needle guide for a 441 needle feed throat plate some time ago. This video shows how this setup can work. Here's the screen shot of the AliExpress page: Thanks Uwe, appreciate for your professional reply, really help me a lot. I will buy one for try...... Quote
Members sakuraleather Posted June 22, 2018 Author Members Report Posted June 22, 2018 14 hours ago, CowBoyOUTLAW said: Uwe is right, you can use smooth feed dog to improve the mark on leather, even completely remove the feed dog, by using Slotted needle plate, see below picture and linkage: http://www.cowboysew.com/saddle-makers-sewing-machine.htm Thanks CowBoy, I checked your website, you are American company or Chinese company? The quality is ok? Quote
Members CowBoyOUTLAW Posted June 23, 2018 Members Report Posted June 23, 2018 8 hours ago, sakuraleather said: Thanks CowBoy, I checked your website, you are American company or Chinese company? The quality is ok? We have been in selling heavy duty industrial sewing machines in United States, Germany, France and Italy for over 15 years!!! Quote
Members Tamaileather Posted July 4, 2018 Members Report Posted July 4, 2018 Hi, i am using seiko tf-6 leather sewing machine, the problem is the small hook can not sew with thick thread (about V138), I heard that the Claes patching machine can be with large bobbin for thick thread, anybody has experience? Second machine is no problem. Quote
Members Constabulary Posted July 4, 2018 Members Report Posted July 4, 2018 (edited) that is a bit of topic in a Juki 441 thread. But yes, the large hook CLAES patchers (subclass 30) easily can handle 138 thread and even larger. Edited July 4, 2018 by Constabulary Quote
Members Tamaileather Posted July 5, 2018 Members Report Posted July 5, 2018 Thanks, do you know where can I purchase a used CLAES patching machine? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.