Members stiffbackjack Posted August 30, 2018 Members Report Posted August 30, 2018 I need to find a handgun for a s&w 38 special ctg with a 6" barrel of a handgun that can be used in it's place.Thanks for your help.Jack Quote
Members koreric75 Posted August 30, 2018 Members Report Posted August 30, 2018 I got a s&w k frame 4" barrel from knife kits, can't remember if they had the 6" barrel. Quote Machines currently in use: Cowboy 3200, Adler 67-372, Singer 66, Singer 15-91
Members chiefjason Posted August 31, 2018 Members Report Posted August 31, 2018 Watch the K frame molds. They have the exposed ejector rods and not the underlugs on most of them. FWIW, I usually have to build up a shorter barrel to make 6" barrel holsters. You don't need a lot of strength, just something to take up the space to mold it. Quote
Members koreric75 Posted August 31, 2018 Members Report Posted August 31, 2018 2 minutes ago, chiefjason said: Watch the K frame molds. They have the exposed ejector rods and not the underlugs on most of them. FWIW, I usually have to build up a shorter barrel to make 6" barrel holsters. You don't need a lot of strength, just something to take up the space to mold it. True, I also thought I was getting a mold for 357, but got the mold for .38, felt quite a bit more narrow but since I wasn't wet forming I was about to make allowance for it Quote Machines currently in use: Cowboy 3200, Adler 67-372, Singer 66, Singer 15-91
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.