Members Instinctive Posted January 15, 2019 Members Report Posted January 15, 2019 I pretty sure the short answer to this is no but there should be a simple solution for you Harward stores like Home Depot, etc. sell nylon nuts and bolts. You should be able to use a standard chicago screw and just purchase a nylon nut that slides over the screw post. Should be about the right thickness too. You may need to drill out the nut. Hope that's clear. In the future likely better to have posted this as a separate question. Things can get buried in these post easily. Quote Eric Fisher Fisher Custom Leather "A Retirement Project" https://fishercustomleather.wordpress.com/
Members c2369zulu Posted January 24, 2019 Members Report Posted January 24, 2019 On 1/13/2019 at 1:23 PM, Sebasopg15 said: Hello everyone, this may not be the proper post for this, but where can I purchase Chicago screws with nylon washers for a QuickDraw Buck sheath I’m making? Thanks in advance! You might also try some of the bigger "got it all" companies like McMaster-Carr.... Quote
Members Sebasopg15 Posted January 31, 2019 Members Report Posted January 31, 2019 On 1/24/2019 at 8:34 AM, c2369zulu said: You might also try some of the bigger "got it all" companies like McMaster-Carr.... thanks!! Quote
Members c2369zulu Posted February 6, 2019 Members Report Posted February 6, 2019 Here is one I recently made for the Becker BK-2. Quote
Members kiwican Posted February 7, 2019 Members Report Posted February 7, 2019 Sweet! Love the skull Quote
Members battlemunky Posted February 7, 2019 Members Report Posted February 7, 2019 (edited) That is damn nice @c2369zulu. Love those TKC scales too..beats the hell out of those grivory ones from the factory. Edited February 7, 2019 by battlemunky Quote
Members CelticPrint Posted February 7, 2019 Members Report Posted February 7, 2019 Real nice, that's something I'd pay for. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.