Clintock Report post Posted November 18, 2018 Would anyone have a manual for singer 111w152 in a pdf format? Quote Share this post Link to post Share on other sites
dikman Report post Posted November 18, 2018 (edited) Try this. I've also got a parts list but it's just over the posting limit. 111w152.pdf Edited November 18, 2018 by dikman Quote Share this post Link to post Share on other sites
Clintock Report post Posted November 18, 2018 Thanks! The presser foot rod is not going up and down and need to see if there’s a part that’s broken or missing. Just got the machine today and want to get it going Quote Share this post Link to post Share on other sites
dikman Report post Posted November 18, 2018 Could be something not tightened up. Quote Share this post Link to post Share on other sites
Clintock Report post Posted November 18, 2018 The rod seems stuck. It can’t be moved by pushing up or pulling down with fingers. Quote Share this post Link to post Share on other sites
dikman Report post Posted November 18, 2018 Got a photo? Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted November 18, 2018 Check the vertical knee lift rod on the back,alot of times it gets bent where it goes through the casting & out the bottom & binds in the hole. Quote Share this post Link to post Share on other sites
Clintock Report post Posted November 18, 2018 Sprayed aerokroil all over everything in the head. Took a brass punch and rubber hammer and freed up the rod. It was gummed up. It sews but I’m not coordinated enough to use it with its speed. It’ll stitch 5” in no time. Will have to get a servo and some smooth feet and feed dog for it. Thanks for the replies! Quote Share this post Link to post Share on other sites
