Members Clintock Posted November 18, 2018 Members Report Posted November 18, 2018 Would anyone have a manual for singer 111w152 in a pdf format? Quote
Members dikman Posted November 18, 2018 Members Report Posted November 18, 2018 (edited) Try this. I've also got a parts list but it's just over the posting limit. 111w152.pdf Edited November 18, 2018 by dikman Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members Clintock Posted November 18, 2018 Author Members Report Posted November 18, 2018 Thanks! The presser foot rod is not going up and down and need to see if there’s a part that’s broken or missing. Just got the machine today and want to get it going Quote
Members dikman Posted November 18, 2018 Members Report Posted November 18, 2018 Could be something not tightened up. Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members Clintock Posted November 18, 2018 Author Members Report Posted November 18, 2018 The rod seems stuck. It can’t be moved by pushing up or pulling down with fingers. Quote
Members dikman Posted November 18, 2018 Members Report Posted November 18, 2018 Got a photo? Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
CowboyBob Posted November 18, 2018 Report Posted November 18, 2018 Check the vertical knee lift rod on the back,alot of times it gets bent where it goes through the casting & out the bottom & binds in the hole. Quote Bob Kovar Toledo Industrial Sewing Machine Sales Ltd. 3631 Marine Rd Toledo,Ohio 43609 1-866-362-7397
Members Clintock Posted November 18, 2018 Author Members Report Posted November 18, 2018 Sprayed aerokroil all over everything in the head. Took a brass punch and rubber hammer and freed up the rod. It was gummed up. It sews but I’m not coordinated enough to use it with its speed. It’ll stitch 5” in no time. Will have to get a servo and some smooth feet and feed dog for it. Thanks for the replies! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.