Members filipblaauw Posted January 12, 2019 Members Report Posted January 12, 2019 As discussed in this thread: dopp-kit.pdf Quote Filip Blaauw - Norway Website: blaauw.me · Instagram: filipbl
Members VYO Posted January 12, 2019 Members Report Posted January 12, 2019 This is super! Thank you! Quote CB 3200, Consew P1206RB, Craftool Pro burnisher, 3000mw desktop laser engraver, PointZero Dual Action Airbrush, Psuedo regad, HF 20 ton clicker, Silhouette Cameo and Cricut
Members Tugadude Posted January 12, 2019 Members Report Posted January 12, 2019 On 1/12/2019 at 12:23 AM, filipblaauw said: As discussed in this thread: dopp-kit.pdfFetching info... Expand If you look around you'll find a number of tutorials on this basic Dopp kit. The way I make them is to separate the zipper and stitch to the outer edge of both sides. This makes alignment easy and surefire. Pry the zipper stop off and unzip until you have two pieces. After construction you re-zip them together. If you do it right it is unnecessary to put a stop back on as the leather acts as a stop, just make sure the zipper ends run past the leather a ways. Youtube has a few tutorials too. Quote
Members Retswerb Posted January 18, 2019 Members Report Posted January 18, 2019 (edited) Thanks for this! Sometimes even these simple projects take a long time to determine dimensions etc. if you’re slow like me. Edited January 18, 2019 by Retswerb Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.