Members hawgrider Posted January 26, 2019 Members Report Posted January 26, 2019 New to farting around with leather. This place was recommended by a leather guy I know. Looking forward to picking up some of the tricks of the trade. I've been dabbling in making a few knife sheaths and a couple of handgun holsters. Here is the 1911-A1 holster I'm working on. I still need to put the finish top coat on. Quote "The clever cat eats cheese and breathes down rat holes with baited breath." W. C. Fields. Find me at the https://theoutdoortradingpost.com/forum.php
Members Dwight Posted January 26, 2019 Members Report Posted January 26, 2019 Hmmm, . . . do I know you from somewhere ???? Cheap advice, . . . if you contact cemented both wings correctly, . . . all that stitching you did around the belt loop holes was really not necessary, . . . adds some character, . . . but for me, . . . that is expensive character, . . . Other than that, . . . looks OK, . . . One other thing, . . . use one single wrap of plastic around the gun, . . . the way you wadded that up, . . . it may stretch the holster and make it be a bit on the loose side. May God bless, Dwight Quote If you can breathe, . . . thank God. If you can read, . . . thank a teacher. If you are reading this in English, . . . thank a veteran. www.dwightsgunleather.com
Members hawgrider Posted January 26, 2019 Author Members Report Posted January 26, 2019 (edited) 4 hours ago, Dwight said: Hmmm, . . . do I know you from somewhere ???? Cheap advice, . . . if you contact cemented both wings correctly, . . . all that stitching you did around the belt loop holes was really not necessary, . . . adds some character, . . . but for me, . . . that is expensive character, . . . Other than that, . . . looks OK, . . . One other thing, . . . use one single wrap of plastic around the gun, . . . the way you wadded that up, . . . it may stretch the holster and make it be a bit on the loose side. May God bless, Dwight Ah ha my favorite preacher is in the house. I used a Fiebing's leathercraft cement. I wasn't sure how the glue would hold up after I soaked it to wet mold. Yes it was a couple hours more work to sew around the belt loops. It would be nice to skip that like you say. Do you think the glue I used will hold up to the soaking for wet molding since its not contact cement? I punched those holes by hand with an awl and it shows in my stitchwork although these look better than my first holster I did. Ordered a diamond hole chisel set so my holes should improve hopefully my saddle Stitch improves as well Edited January 26, 2019 by hawgrider Quote "The clever cat eats cheese and breathes down rat holes with baited breath." W. C. Fields. Find me at the https://theoutdoortradingpost.com/forum.php
Members Dwight Posted January 26, 2019 Members Report Posted January 26, 2019 (edited) I have no experience with the leathercraft cement, . . . though I've heard good words about it. Back over 50 years ago I began using Weldwood contact cement for formica kitchen cabinets, . . . found out it worked on a host of other stuff, . . . naturally gravitated to it for leather, . . . have never been sorry. You can put two pieces of leather together with it, . . . and then rip them apart, . . . but the glue doesn't give, . . . the leather does. Leathercraft cement could not be any better, . . . only equal the Weldwood. I actually did a small holster for a Bersa Thunder years ago, . . . Weldwood only, . . . not one stitch in it. I'd bet it is still together. And yes, . . . it holds up even thru wet forming. Anyway, . . . keep up the good work. May God bless, Dwight Edited January 26, 2019 by Dwight Quote If you can breathe, . . . thank God. If you can read, . . . thank a teacher. If you are reading this in English, . . . thank a veteran. www.dwightsgunleather.com
Members hawgrider Posted January 27, 2019 Author Members Report Posted January 27, 2019 56 minutes ago, Dwight said: I have no experience with the leathercraft cement, . . . though I've heard good words about it. Back over 50 years ago I began using Weldwood contact cement for formica kitchen cabinets, . . . found out it worked on a host of other stuff, . . . naturally gravitated to it for leather, . . . have never been sorry. You can put two pieces of leather together with it, . . . and then rip them apart, . . . but the glue doesn't give, . . . the leather does. Leathercraft cement could not be any better, . . . only equal the Weldwood. I actually did a small holster for a Bersa Thunder years ago, . . . Weldwood only, . . . not one stitch in it. I'd bet it is still together. And yes, . . . it holds up even thru wet forming. Anyway, . . . keep up the good work. May God bless, Dwight I'll have to see if I can find the weldwood contract cement. Thanks for the howdy and the advise. Quote "The clever cat eats cheese and breathes down rat holes with baited breath." W. C. Fields. Find me at the https://theoutdoortradingpost.com/forum.php
Members Dwight Posted January 27, 2019 Members Report Posted January 27, 2019 Lowes has it for something like $13 a pint, . . . for the liquid, . . . the gel is a bit more, . . . and at times is well worth the extra couple bucks. The liquid tends to thicken up as the solvent escapes, . . . adding a bit of acetone thins it right back out. May God bless, Dwight Quote If you can breathe, . . . thank God. If you can read, . . . thank a teacher. If you are reading this in English, . . . thank a veteran. www.dwightsgunleather.com
alpha2 Posted January 27, 2019 Report Posted January 27, 2019 Nice holster. I've had the same results with Weldwood contact cement, great stuff, held fine through wet molding for me too. Took me a second or two to figure out where you were from. Said it fast and the lights went on! Spent way too many years there in the 70's and 80's. (Lansing). Jeff Quote So much leather...so little time.
Members hawgrider Posted January 27, 2019 Author Members Report Posted January 27, 2019 27 minutes ago, alpha2 said: Nice holster. I've had the same results with Weldwood contact cement, great stuff, held fine through wet molding for me too. Took me a second or two to figure out where you were from. Said it fast and the lights went on! Spent way too many years there in the 70's and 80's. (Lansing). Jeff LOL! Yes "meat chic ken." The great lakes state. Lansing is about an hour from where I'm at. Quote "The clever cat eats cheese and breathes down rat holes with baited breath." W. C. Fields. Find me at the https://theoutdoortradingpost.com/forum.php
Members hawgrider Posted January 27, 2019 Author Members Report Posted January 27, 2019 First coat of Resolene seems like it went on ok this is the first time I've used Resolene. Probably do at least one more coat of it? Quote "The clever cat eats cheese and breathes down rat holes with baited breath." W. C. Fields. Find me at the https://theoutdoortradingpost.com/forum.php
Members Dwight Posted January 27, 2019 Members Report Posted January 27, 2019 Did you cut it with water first?? Should always be cut 50 / 50 with tap water, . . . otherwise it goes on too thick, . . . becomes brittle at times. I usually do 2 coats of it reduced, . . . sometimes 3. May God bless, Dwight Quote If you can breathe, . . . thank God. If you can read, . . . thank a teacher. If you are reading this in English, . . . thank a veteran. www.dwightsgunleather.com
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.