Jump to content

Recommended Posts

  • Members
Posted
On 3/28/2019 at 6:20 PM, John11214 said:

Ya, from Kevin Lee. I too thought shipping would take weeks from China but no. The return address was from California. 

Could you please give me the tooth width size of your KL set? Thank you so much,

  • Members
Posted (edited)

Here, I took a pic for you. I would say its around 1.6 to 1.7mm. Height is about 10mm and at 10mm the width is bout 2-2.1mm. I am curious if he can make it a same width from end to end.

Screen Shot 2019-03-30 at 1.42.56 AM.png

Edited by John11214
  • Members
Posted
On 3/30/2019 at 1:45 AM, John11214 said:

Here, I took a pic for you. I would say its around 1.6 to 1.7mm. Height is about 10mm and at 10mm the width is bout 2-2.1mm. I am curious if he can make it a same width from end to end.

Screen Shot 2019-03-30 at 1.42.56 AM.png

Thank you for your photo. How do you feel about this pricking irons?

  • Members
Posted

Honestly, I think these are good for the price. It is sharp, going through leather is smooth. I just tested it out, take a look. Two layers of Wickett & Craig Bridle, about 3-4 oz, with Vinyl MBT .45 and .55. Top is .45, middle is .55 and bottom is .45mm. BUT! I wish the teeth were longer with less taper going up, that might not be possible though.

 

 

Screen Shot 2019-03-31 at 9.41.14 PM.png

  • Contributing Member
Posted

I will take the Kevin Lee tools if they are till available?

PM sent to op.

  • Members
Posted
15 hours ago, John11214 said:

1 more pic

Screen Shot 2019-03-31 at 9.54.25 PM.png

You could try sinabroks by now.im using 3.38 and love it

  • 1 year later...
Guest
This topic is now closed to further replies.
×
×
  • Create New...