Members jennifer1962 Posted March 27, 2019 Members Report Posted March 27, 2019 (edited) Hi there, Im from Oregon, but am working overseas, trying to get a small leather company up and running to help my two disabled adult children income I thought I was almost at the finish line to split my veg tan leather to sew pockets for my traveler's notebooks, so...and I ordered a Tandy leather splitter, which cost me an arm and a leg to ship overseas, and found that it seems to be only for thin pieces of leather, because when we tried to put our five inch wide piece through, it was so hard to get it through that we have to pull so hard and it stretches the leather:( Im so lost... it sees like i bought the wrong tool. Edited March 27, 2019 by jennifer1962 wanted to show the leather Quote
RockyAussie Posted March 27, 2019 Report Posted March 27, 2019 Others may say different but 5" wide veg can be difficult to get right with even a bandknife splitter of which I have 2 types. I would be shocked if the machine you have could do anything reliable wider than 2" unless fairly soft and with enough thickness. A bell knife skiver could do it with multiple passes or if that is to expensive yet a sanding machine may be an answer.Multi tool sander and adaptions for dust extraction and leather thinning.pdf Quote Wild Harry - Australian made leather goodsYouTube Channel Instagram
Members Dwight Posted March 27, 2019 Members Report Posted March 27, 2019 THE key, Jennifer, . . . that blade has to be polished, . . . polished sharp, . . . and if you have never done it, . . . it takes a good effort to get the technique down. This video shows one way to do it: The sharper your blade is, . . . the easier it is to cut the leather. ALSO, . . . give the leather a light coat of neatsfoot oil 24 to 36 hours before you start to cut it, . . . THAT will greatly improve your cutting. A useful tool is a pair of hand metal seamer tool. Harbor freight has them: 6 in. Straight Jaw Sheet Metal Seamer Pittsburgh®- Item#98728 That tool will help you pull the leather thru, . . . and use a bit of a side to side motion, . . . so you are cutting one corner, . . . then the next, . . . back and forth. It can be done, . . . and again, . . . you need that blade to be scary sharp, . . . and be careful. Once you get it up there polished and really sharp, . . . you can nick yourself with it, . . . and you won't even notice it until you see the blood all over. May God bless, Dwight Quote If you can breathe, . . . thank God. If you can read, . . . thank a teacher. If you are reading this in English, . . . thank a veteran. www.dwightsgunleather.com
Members Danne Posted March 27, 2019 Members Report Posted March 27, 2019 You have four different alternatives here (Depending on the thickness you want) 1. Crank splitter At least 1000 euro. With a sharp blade you can split veg tan down to 0.5mm 2. Skiving machine Around 1000euro for a Chinese machine. The primary use for this machine is to thin down edges, but you can split leather in sections, but it requires practice. 3. Band knife splitter. A used old machine 2-3000euro (Requires VERY good mechanical skills, since they are very finicky) A new machine is around 12000euro. 4. Send leather to someone who split it for you and you can get it as thin as you want. (Depending on accessories to the machine, but at least down to 0.5mm) With the width, you are going to split I think #4 is the best affordable solution. Where are you located? Quote
Members beaulama Posted March 27, 2019 Members Report Posted March 27, 2019 5 hours ago, jennifer1962 said: Hi there, Im from Oregon, but am working overseas, trying to get a small leather company up and running to help my two disabled adult children income I thought I was almost at the finish line to split my veg tan leather to sew pockets for my traveler's notebooks, so...and I ordered a Tandy leather splitter, which cost me an arm and a leg to ship overseas, and found that it seems to be only for thin pieces of leather, because when we tried to put our five inch wide piece through, it was so hard to get it through that we have to pull so hard and it stretches the leather:( Im so lost... it sees like i bought the wrong tool. Hello Jennifer, I have the same splitter machine and obviously met this problem. I have not a miraculous solution for you, but the best sharpenned your blade is the easier it will be. Anyway, this machine is made to split vegetable tanned leather in a smaller width than the blade is. You can try after sharpen your blade like a straight razor with japanese wet stone and strop to pull with two pairs of solid clamp one in each hand, perhaps it will works. But, you must consider that the part of leather you take with clamps is lost because the leather will be marked with them. The solution of multiple passes in a skiving machine is a possibility if you have one but the presser foot will mark the grain side of your leather. In conclusion, the best way is to find a saddler with an electric splitting machine who accept to split your leather. In France leather suppliers have this machine and accept against a little sum of money to do that for you, then you will have a very nice piece of leather in the thickness you want, perhaps is it a good way for you. Good searchand excuse my poor english, Alain. Quote
Members jennifer1962 Posted March 27, 2019 Author Members Report Posted March 27, 2019 wow! so many ideas and options, thank you so much, we are very new to this field, we have a vision, but we are kind of like the blind leading the blind. 4 hours ago, RockyAussie said: Others may say different but 5" wide veg can be difficult to get right with even a bandknife splitter of which I have 2 types. I would be shocked if the machine you have could do anything reliable wider than 2" unless fairly soft and with enough thickness. A bell knife skiver could do it with multiple passes or if that is to expensive yet a sanding machine may be an answer.Multi tool sander and adaptions for dust extraction and leather thinning.pdf That's very good information, i really thought I only had to buy a splitter as wide as the leather. Also I didn't know that thickness made a difference. THank hou Quote
Members jennifer1962 Posted March 27, 2019 Author Members Report Posted March 27, 2019 Yes, sharpening knives is very scary, but the idea of neats foot conditioner and the 6 in. Straight Jaw Sheet Metal Seamer is a great idea. Thank you so much:) Quote
Members jennifer1962 Posted March 27, 2019 Author Members Report Posted March 27, 2019 22 minutes ago, Danne said: You have four different alternatives here (Depending on the thickness you want) 1. Crank splitter At least 1000 euro. With a sharp blade you can split veg tan down to 0.5mm 2. Skiving machine Around 1000euro for a Chinese machine. The primary use for this machine is to thin down edges, but you can split leather in sections, but it requires practice. 3. Band knife splitter. A used old machine 2-3000euro (Requires VERY good mechanical skills, since they are very finicky) A new machine is around 12000euro. 4. Send leather to someone who split it for you and you can get it as thin as you want. (Depending on accessories to the machine, but at least down to 0.5mm) With the width, you are going to split I think #4 is the best affordable solution. Where are you located? Wow that sounds expensive and im worried about not having anyone to sharpen it where we are And there isn't anyone on this side of the world who splits leather. Our concern is that we need to use the same cow for the pockets, because the dye changes soooo much between cows. And the pockets need to match. Thanks so much Quote
Members jennifer1962 Posted March 27, 2019 Author Members Report Posted March 27, 2019 you all have been amazing, I'm going to try and see if the tool helps pulling it through along with the conditioner (not sure which side to put the conditioner on) I really had no idea this tool was for small strips. One day if we have enough money we can get a crank splitter, BuT who would be able to sharpen it for us , we are in the middle of nowhere, and if it dulls??? Quote
Members jennifer1962 Posted March 27, 2019 Author Members Report Posted March 27, 2019 46 minutes ago, Dwight said: THE key, Jennifer, . . . that blade has to be polished, . . . polished sharp, . . . and if you have never done it, . . . it takes a good effort to get the technique down. This video shows one way to do it: The sharper your blade is, . . . the easier it is to cut the leather. ALSO, . . . give the leather a light coat of neatsfoot oil 24 to 36 hours before you start to cut it, . . . THAT will greatly improve your cutting. A useful tool is a pair of hand metal seamer tool. Harbor freight has them: 6 in. Straight Jaw Sheet Metal Seamer Pittsburgh®- Item#98728 That tool will help you pull the leather thru, . . . and use a bit of a side to side motion, . . . so you are cutting one corner, . . . then the next, . . . back and forth. It can be done, . . . and again, . . . you need that blade to be scary sharp, . . . and be careful. Once you get it up there polished and really sharp, . . . you can nick yourself with it, . . . and you won't even notice it until you see the blood all over. May God bless, Dwight 1 Hi i just ordered the tool you spoke about, thank you so much, we don't have much upper body strength, this should help. Again thank sooo much God Bless you too Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.