Fonzarellis Report post Posted June 19, 2019 A gamer asked me to make some dragon themed dice cups. It took her a minute or two to notice the french nails....er.. claws. Quote Share this post Link to post Share on other sites
Sperrier Report post Posted June 19, 2019 Nice detailing and good alignment, Lawful good.LoL I love the design and coloring especaily on the center cup. These are now on my todo list of future projects as with a pouch for holding the dice that fits inside the cup. Thanks for the inspiration. Any tips you want to share on making a cup as this will be my first? Quote Share this post Link to post Share on other sites
Fonzarellis Report post Posted June 19, 2019 This chick would probably fall into the chaotic evil crowd but thanks for the comments. I have several templates for dragons if you like that motif. Pm me with your email and I'll send 'em your way. Quote Share this post Link to post Share on other sites
HaloJones Report post Posted June 20, 2019 Most definitely CG here, I have done dice bags but not cups, they are now on the to do list along with a rolling tray but those are great:) Quote Share this post Link to post Share on other sites
Fonzarellis Report post Posted June 20, 2019 Thank you. Now I have another project to add to MY list....a rolling tray. Quote Share this post Link to post Share on other sites
spacedog Report post Posted June 20, 2019 Excellent work! Those look great. Quote Share this post Link to post Share on other sites
Fonzarellis Report post Posted June 20, 2019 Thank you! Quote Share this post Link to post Share on other sites
plinkercases Report post Posted June 20, 2019 Supper work. Love to see the bottom and how the stitching works out. Quote Share this post Link to post Share on other sites
Fonzarellis Report post Posted June 20, 2019 Thanks for the kind words. I formed a disk over a homemade mold, stamped my logo then made a small stand with some scrap plywood and a short piece of 2x2. I already had the holes punched in the cup but used an awl to punch each hole in the bottom as I stitched it. Made a special tool to support the bottom piece as I punched each hole. Real pain in the rear but I learned a few things in the process. If I get any more orders for these I'll post a pic of the bottoms. Quote Share this post Link to post Share on other sites
