Members TheHollerLW Posted September 19, 2019 Members Report Posted September 19, 2019 Not always but when i go from two layers of leather to a single layer the thread pattern just gets destroyed. In this case its two 3.5 oz pieces of leather and im using 138 on a coyboy 3200 thanks Quote
Members Hildebrand Posted September 19, 2019 Members Report Posted September 19, 2019 Just tossing out a suggestion, maybe need just a touch more pressor foot tension. Stitches look excellent on the double layer so I wonder if the single layer follows the needle up a bit if that messes with the stitches. Todd Quote
Northmount Posted September 19, 2019 Report Posted September 19, 2019 @TheHollerLW Moved your post to Leather Sewing Machines. You'll get more action here. Tom Quote
Moderator Wizcrafts Posted September 19, 2019 Moderator Report Posted September 19, 2019 #138 bonded thread is best used when the thickness is about 6 to 7 ounces. This is due to the diameter of the lockstitch "knots." Since you are sewing a single layer of 3.5 ounces, the otherwise well hidden knots are showing on the top. You have three possible solutions to hide the knots in the single layer. Use one size smaller needle to have tighter holes that make it harder to pull the knots to the top. Tighten the bobbin and top tensions to have tighter knots that may be easier to center, or place lower inside the leather. Switch to #92 bonded thread which is much easier to bury in 3.5 ounces, while only losing 25% strength. You'll need a #19 or 20 needle for #92 thread. Quote
Members TheHollerLW Posted September 19, 2019 Author Members Report Posted September 19, 2019 11 minutes ago, Wizcrafts said: #138 bonded thread is best used when the thickness is about 6 to 7 ounces. This is due to the diameter of the lockstitch "knots." Since you are sewing a single layer of 3.5 ounces, the otherwise well hidden knots are showing on the top. You have three possible solutions to hide the knots in the single layer. Use one size smaller needle to have tighter holes that make it harder to pull the knots to the top. Tighten the bobbin and top tensions to have tighter knots that may be easier to center, or place lower inside the leather. Switch to #92 bonded thread which is much easier to bury in 3.5 ounces, while only losing 25% strength. You'll need a #19 or 20 needle for #92 thread. Thank you very much Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.