Members HaloJones Posted November 21, 2019 Author Members Report Posted November 21, 2019 So I put soles on & took the shoes off the last, the results were not as I hoped, the shoes has come up very wide, but I know where I went wrong & will try again (photo shows unfinished shoe as I would normally trim the lining at the top & dye the sole & heel) Quote
RockyAussie Posted November 21, 2019 Report Posted November 21, 2019 Could you post a picture side on of just the last?I am curious to see the shape that you are starting with. The quarters look to be too high on where they connect to your vamp and the backward angle of your heel counter also makes me think this. Also I think your top line pattern may be too high on your last giving you an oversized upper to try and deal with. I must congratulate you on your efforts so far and thank you for sharing your journey with us all on here. Quote Wild Harry - Australian made leather goodsYouTube Channel Instagram
Members HaloJones Posted November 22, 2019 Author Members Report Posted November 22, 2019 Lasts as below, I think where I went wrong was the inner sole I made was too wide at the waist & I did not pull the upper tight enough on the last, Quote
RockyAussie Posted November 22, 2019 Report Posted November 22, 2019 Thanks ...the lasts look alright. When you do your toe 1st pulling you should see the heel counter cup in around at the top line. It appears to me that your curve has not enough swell at the lower side compared to the top but that may be just the picture perhaps. Quote Wild Harry - Australian made leather goodsYouTube Channel Instagram
Members HaloJones Posted November 22, 2019 Author Members Report Posted November 22, 2019 Thanks RockyA Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.