Members DylanW Posted October 17, 2019 Members Report Posted October 17, 2019 (edited) Im looking into getting a sewing machine for auto upholstery and leather working. I found these 3 machines on Craigslist but wasn't sure which would work the best/which was the best value. The Juki LU-563 is $725, Consew 146rb-1 is $950 and the Consew 226 is $1000. What would you recommend. Edited October 17, 2019 by DylanW Quote
Members shoepatcher Posted October 17, 2019 Members Report Posted October 17, 2019 The Lu563 is the best machine for what you are doing. glenn Quote
Moderator Wizcrafts Posted October 17, 2019 Moderator Report Posted October 17, 2019 Depending on their conditions, I'd look at the Juki LU-563 or Consew 146rb-1 before the Consew 226. The 226 has a smaller bobbin. The significant differences between the first two is that the Juki has triple feed, straight stitch and a drop in extra large bobbin, whereas the Consew 146 has top and bottom feed only, a slightly smaller M bobbin and wide zig-zag. The Juki uses Singer 111w155 style feet which are available in a myriad of configurations. There would be fewer presser foot options for the Consew 146 compared to the Juki. Also, the Juki 563 may take heavier thread than the Consew. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members Pintodeluxe Posted October 17, 2019 Members Report Posted October 17, 2019 I'd recommend the Juki LU-563 without hesitation. It's the machine I use personally, and it has an extra large capacity U style bobbin (even bigger than an M bobbin). Plus it has other features that I like such as top loading (drop-in) bobbin, and a large paddle style reverse lever. Quote
Members Constabulary Posted October 17, 2019 Members Report Posted October 17, 2019 Juki 563 - for sure! Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
DonInReno Posted October 28, 2019 Report Posted October 28, 2019 On 10/17/2019 at 2:40 AM, DylanW said: ....which would work the best/which was the best value. ... Without looking at the condition of each there’s no way to say which is a decent deal. No way is a clapped out 563-c with no reverse worth $600, but if it’s solid throughout that’s probably the market price for a used one. Same goes for the others. I get a kick out of machines that are a collection of every bad part in a shop... lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.