dikman Report post Posted January 23, 2020 At least as regards the knee lifter. I'm surprised you could get any lift at all, the mechanics and leverage were all wrong. I agree with kgg about just using 1 strand of the wire (or you could replace it with a chain). The hole it goes through in the table looks like it's already been elongated a bit? Don't be scared to tinker with the various adjustments on the knee mechanism to make it more comfortable to use. Quote Share this post Link to post Share on other sites
kgg Report post Posted January 23, 2020 1 hour ago, pattysoup said: A few weeks ago I spoke to another dealer who told me all Juki machines are now made in China? The only Juki that I know of being still made in Japan is the 1541S all the rest are sadly being made in China. But that is another discussion. kgg Quote Share this post Link to post Share on other sites
oldtimer Report post Posted March 5, 2022 The knee lift is not supposed to be connected to the wire ! Om the back side of the machine there is a rod with a spring that is to be connected to the knee lift lever.. The wite is used when you operate the presser foot lift with a pedal. The one who set this up does not know what he is doing! My humble opinion Quote Share this post Link to post Share on other sites
