Members jujulolo Posted February 1, 2020 Members Report Posted February 1, 2020 Hello and sorry for the beginer question. I have read a little about how to lace, the whip stitch, the running stitch ... I think i understand the theory but what i don't understand is which kind of holes must be used? Sometimes in the examples they are round, sometimes punched using thonging chisels that make "square" holes, sometimes parallel to the edge and sometimes with an angle ? Is there a rule of thumb for which kind of holes must be made for which kind of work? I have a few of small project in mind that require lacing. Beside the lace what should i buy? Lacing chisels (angled or not) or only a round drive punch? Thanks for your help Quote
CFM chuck123wapati Posted February 1, 2020 CFM Report Posted February 1, 2020 8 minutes ago, jujulolo said: Hello and sorry for the beginer question. I have read a little about how to lace, the whip stitch, the running stitch ... I think i understand the theory but what i don't understand is which kind of holes must be used? Sometimes in the examples they are round, sometimes punched using thonging chisels that make "square" holes, sometimes parallel to the edge and sometimes with an angle ? Is there a rule of thumb for which kind of holes must be made for which kind of work? I have a few of small project in mind that require lacing. Beside the lace what should i buy? Lacing chisels (angled or not) or only a round drive punch? Thanks for your help Nope! Some may have personal beliefs but it pretty much up to you how you want your work to look. The Tandy website has a ton of free ebooks covering most everything you need to know. It an awesome resource for the beginners and old timers alike https://www.leathercraftlibrary.com/category/79/ebooks?pagenum=1 Try the book "How to lace" among others . Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Contributing Member LatigoAmigo Posted February 1, 2020 Contributing Member Report Posted February 1, 2020 17 minutes ago, jujulolo said: Is there a rule of thumb for which kind of holes must be made for which kind of work? Since you have a few projects in mind, you might want to get the best book I know of on the subject, "The Art of Hand Sewing", by Al Stohlman. It is available through Amazon. https://www.amazon.com/Art-Hand-Sewing-Leather/dp/1892214911/ref=sr_1_1?keywords=leather+stitching+book&qid=1580585416&sr=8-1 Quote
CFM chuck123wapati Posted February 1, 2020 CFM Report Posted February 1, 2020 7 minutes ago, LatigoAmigo said: Since you have a few projects in mind, you might want to get the best book I know of on the subject, "The Art of Hand Sewing", by Al Stohlman. It is available through Amazon. https://www.amazon.com/Art-Hand-Sewing-Leather/dp/1892214911/ref=sr_1_1?keywords=leather+stitching+book&qid=1580585416&sr=8-1 its also free on the tandy website Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Contributing Member LatigoAmigo Posted February 1, 2020 Contributing Member Report Posted February 1, 2020 18 minutes ago, chuck123wapati said: its also free on the tandy website That is a very interesting site, thanks for sharing. I'm sorry to say, but I'm getting old and have found that very few things are actually "free." When you click through to this book, you don't just get to download it from the site, but have to provide your contact information first. Not quite "free." Quote
CFM chuck123wapati Posted February 1, 2020 CFM Report Posted February 1, 2020 (edited) 21 minutes ago, LatigoAmigo said: That is a very interesting site, thanks for sharing. I'm sorry to say, but I'm getting old and have found that very few things are actually "free." When you click through to this book, you don't just get to download it from the site, but have to provide your contact information first. Not quite "free." All you need is an account and if you shop Tandy online its no different. Didn't cost a penny to make an account either so.... On the amazon site however it does cost real money! over 20 bucks for most, one of them $528.00 + your contact information. Edited February 1, 2020 by chuck123wapati Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Contributing Member JLSleather Posted February 1, 2020 Contributing Member Report Posted February 1, 2020 That how to lace book really has a LOT of information - worth getting (and free doesn't hurt a bit). https://www.leathercraftlibrary.com/product/1110/how-to-lace The holes you'll want to use can depend on the type of lacing you want to do and the type of product you put it on. For most small items - notebooks on down - I use a "double loop" lace more often than not ... and when I do that, I like angled slits - not punched holes. A little experience will teach you what YOU prefer - don't take long to get the hang of it. Angled slits, but I punched a small (like size 00) hole in the very corner. Allows the lace to flow and lay straight despite the bulk of lacing through the corner hole 3 times. Same "double loop" lacing, but used small round holes due to the snake (python) skin. Slits may start a tear in the very thin (and fragile scale) snake hide. Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
CFM chuck123wapati Posted February 1, 2020 CFM Report Posted February 1, 2020 9 minutes ago, JLSleather said: That how to lace book really has a LOT of information - worth getting (and free doesn't hurt a bit). https://www.leathercraftlibrary.com/product/1110/how-to-lace The holes you'll want to use can depend on the type of lacing you want to do and the type of product you put it on. For most small items - notebooks on down - I use a "double loop" lace more often than not ... and when I do that, I like angled slits - not punched holes. A little experience will teach you what YOU prefer - don't take long to get the hang of it. Angled slits, but I punched a small (like size 00) hole in the very corner. Allows the lace to flow and lay straight despite the bulk of lacing through the corner hole 3 times. Same "double loop" lacing, but used small round holes due to the snake (python) skin. Slits may start a tear in the very thin (and fragile scale) snake hide. those are purdy! Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Contributing Member JLSleather Posted February 1, 2020 Contributing Member Report Posted February 1, 2020 1 hour ago, chuck123wapati said: those are purdy! 'preciatecha Them wallets went out a good while back.. just pics that were already on this site. And the bracelets are comin a year old now, and my daughter and her friend are ridin' pretty hard about gittin new ones done in black shark hide. Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members jujulolo Posted February 1, 2020 Author Members Report Posted February 1, 2020 Thank you very much to all for all these informations ! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.