Gulrok Report post Posted February 5, 2020 Hi Folks. I have a Techsew 2750 Pro and have had really good success with it... for awhile. Until today. All of a sudden it jammed and then it wouldn't feed. I thought it was out of time, because of the jam. So I checked and we're still catching the thread. We noticed that the presser foot wasn't feeding correctly. In the down position, it hops choppy and doesn't feed right. With the presser foot up it it performs the feeding motion correctly. I'm not even sure where to go next. Quote Share this post Link to post Share on other sites
Rodzhobyz Report post Posted February 5, 2020 Does this model have a safety clutch that may have tripped? Quote Share this post Link to post Share on other sites
Gulrok Report post Posted February 5, 2020 12 hours ago, Rodzhobyz said: Does this model have a safety clutch that may have tripped? I'm having trouble finding if I have a safety clutch.... Quote Share this post Link to post Share on other sites
Gulrok Report post Posted February 5, 2020 So it appears my model DOES have a safety clutch. However, that isn't what is going on with it. The safety clutch doesn't appear to be engaged. Quote Share this post Link to post Share on other sites
Techsew Ron Report post Posted February 5, 2020 14 hours ago, Gulrok said: Hi Folks. I have a Techsew 2750 Pro and have had really good success with it... for awhile. Until today. All of a sudden it jammed and then it wouldn't feed. I thought it was out of time, because of the jam. So I checked and we're still catching the thread. We noticed that the presser foot wasn't feeding correctly. In the down position, it hops choppy and doesn't feed right. With the presser foot up it it performs the feeding motion correctly. I'm not even sure where to go next. Hi @Gulrok , please send us an email so we can help you troubleshoot this. Quote Share this post Link to post Share on other sites
Gulrok Report post Posted February 5, 2020 15 minutes ago, Techsew Ron said: Hi @Gulrok , please send us an email so we can help you troubleshoot this. Support@techsew.com correct? I have an email in already. Reaching out to other sources until I get a response to hopefully solve this problem quickly. We only have one sewing machine (and we're in the market for another one.. thinking Juki 1508, Techsew 1660 Pro.. CB-1541s, or a Cobra Class 20) so we're burning up time right now. Workshop is getting a deep cleaning I guess. haha. Quote Share this post Link to post Share on other sites
Techsew Ron Report post Posted February 5, 2020 13 minutes ago, Gulrok said: Support@techsew.com correct? I have an email in already. perfect we'll look into this asap Quote Share this post Link to post Share on other sites
kgg Report post Posted February 5, 2020 23 minutes ago, Gulrok said: (and we're in the market for another one.. thinking Juki 1508, Techsew 1660 Pro.. CB-1541s, or a Cobra Class 20) Save yourself the hassle, buy the brand name that the clones are aspiring to copy. Either the Juki 1541S or better the Juki 1508. You will not be disappointed. kgg Quote Share this post Link to post Share on other sites
Constabulary Report post Posted February 5, 2020 reassemble the machine and shoot a new video - w/o needle plate / throat plate it will not feed the material because the inner foot is lifting when the outer foot is touching the needle plate. When no needle plate is installed the inner foot will stay on the feed dog. Or am I wrong? Quote Share this post Link to post Share on other sites
Gulrok Report post Posted February 5, 2020 10 minutes ago, Constabulary said: reassemble the machine and shoot a new video - w/o needle plate / throat plate it will not feed the material because the inner foot is lifting when the outer foot is touching the needle plate. When no needle plate is installed the inner foot will stay on the feed dog. Or am I wrong? Quote Share this post Link to post Share on other sites
Gulrok Report post Posted February 5, 2020 10 minutes ago, Constabulary said: reassemble the machine and shoot a new video - w/o needle plate / throat plate it will not feed the material because the inner foot is lifting when the outer foot is touching the needle plate. When no needle plate is installed the inner foot will stay on the feed dog. Or am I wrong? @Techsew Ron @Constabulary It appears that for some reason when it jammed, it stopped feeding so we took it apart. It essentially did exactly what it was doing. We must have cleared the problem when dissembling and didn't bother to put it back all the way together to test. Makes sense now. Thank you.. Quote Share this post Link to post Share on other sites
