Members dikman Posted February 8, 2020 Members Report Posted February 8, 2020 On 2/8/2020 at 2:28 AM, Constabulary said: Seems it depends on the installed motor if SR and EPS (or NPS) can work together. I remember a post here where a member from Germany added a 2nd magnet to the EPS sensor and solved the issue but I´m not sure if this works on all servo motors - I doubt this. I´m one of those who do not need at EPS (yet - but you never know). You're right, it didn't work on mine. With a speed reducer the NPS wouldn't work at all, just locked up the machine, so I added the extra magnet and this time it ran but I couldn't choose whether it stopped needle up or down, sometimes up, sometimes down. I think the problem is that there is no option within the parameters to change this when using two magnets. Doesn't really matter as I don't need the NPS, I was just curious whether I could get it to work. Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.