Jump to content

Recommended Posts

  • 3 weeks later...
  • Members
Posted

That’s a great looking case! I did something much smaller than this a while ago and stitching the slots gave me fits. Looks like you’ve got that all figured out.

  • Members
Posted (edited)
24 minutes ago, Retswerb said:

That’s a great looking case! I did something much smaller than this a while ago and stitching the slots gave me fits. Looks like you’ve got that all figured out.

thanks.

show us that.

 
Edited by paloma

time does not respect what is done without it

https://tradisign.blogspot.com

https://www.instagram.com/tradisign/

 

  • Members
Posted

It was a gift I gave, a case with slots for essential oil bottles. I’ve been thinking of making a pen case, lots of other projects to tackle first.

  • 7 months later...
  • Members
Posted

@paloma this is a great piece of work! Sheepskin and calfskin - it came out beautifully. Calfskin outer and sheepskin inside, I guess? What thickness are those leathers, please?

And on a side note - those pens... Fountain pens mostly if I'm not mistaken? I'm drooling... :jawdropper:

Sorry for reviving an old post, I have not been to this part of the site in a few months. Me bad. 

"People are more violently opposed to fur than to leather because it's safer to harass people in coats than to try being nasty to motorcycle gangs." ~Anonymous

  • Members
Posted
On 1/10/2021 at 2:30 AM, Riem said:

@paloma this is a great piece of work! Sheepskin and calfskin - it came out beautifully. Calfskin outer and sheepskin inside, I guess? What thickness are those leathers, please?

And on a side note - those pens... Fountain pens mostly if I'm not mistaken? I'm drooling... :jawdropper:

Sorry for reviving an old post, I have not been to this part of the site in a few months. Me bad. 

Hi Riem,

1.3mm for outer leather, and 0.8mm for inner leather.

yes, only fountain pens are the only ones that deserve a respectful case.;)

time does not respect what is done without it

https://tradisign.blogspot.com

https://www.instagram.com/tradisign/

 

  • Members
Posted (edited)

So no place for my Bic Biro then sorry could not resist.

And that's nice work too like that, and i do like a nice fountain pen also.

JCUK

Edited by jcuk
  • Members
Posted
On 1/11/2021 at 3:27 PM, paloma said:

Hi Riem,

1.3mm for outer leather, and 0.8mm for inner leather.

yes, only fountain pens are the only ones that deserve a respectful case.;)

I'll have to visit my leather supplier again - thinnest I have is 1.6 - 2mm... Good reason to drive the 80 km. ;-) I have  Parker or two and a couple of Sheaffers and a Faber-Castell a friend gave me recently, straight from the factory, and then there's my calligraphy pens and I think there's... No wait, this is a leathercraft forum... Sigh, so many hobbies, so little time. But I love the look of your pen case - absolutely stunning. 

"People are more violently opposed to fur than to leather because it's safer to harass people in coats than to try being nasty to motorcycle gangs." ~Anonymous

  • Members
Posted
5 hours ago, Riem said:

I'll have to visit my leather supplier again - thinnest I have is 1.6 - 2mm... Good reason to drive the 80 km. ;-) I have  Parker or two and a couple of Sheaffers and a Faber-Castell a friend gave me recently, straight from the factory, and then there's my calligraphy pens and I think there's... No wait, this is a leathercraft forum... Sigh, so many hobbies, so little time. But I love the look of your pen case - absolutely stunning. 

It's not very difficult to do but you have to start from a good template/patern.

time does not respect what is done without it

https://tradisign.blogspot.com

https://www.instagram.com/tradisign/

 

Guest
This topic is now closed to further replies.
×
×
  • Create New...