Members DavidMillsSaddlery Posted May 12, 2020 Author Members Report Posted May 12, 2020 @CowboyBob or is this what you’re referring to? whats this pin doing? Quote
CowboyBob Posted May 12, 2020 Report Posted May 12, 2020 Yes.you need to remove that pin somebody put in there. Quote Bob Kovar Toledo Industrial Sewing Machine Sales Ltd. 3631 Marine Rd Toledo,Ohio 43609 1-866-362-7397
Members DavidMillsSaddlery Posted May 12, 2020 Author Members Report Posted May 12, 2020 1 minute ago, CowboyBob said: Yes.you need to remove that pin somebody put in there. I’m going to kick their butt! how do you remove this type of pin? Quote
CowboyBob Posted May 12, 2020 Report Posted May 12, 2020 (edited) Get a punch,nail anything the size of the pin & tap it out! They might of had a problem with the timing slipping is why the did that.You might try putting a screwdriver in the slot & gently try to pry it open. Edited May 12, 2020 by CowboyBob Quote Bob Kovar Toledo Industrial Sewing Machine Sales Ltd. 3631 Marine Rd Toledo,Ohio 43609 1-866-362-7397
Members DavidMillsSaddlery Posted May 12, 2020 Author Members Report Posted May 12, 2020 10 minutes ago, CowboyBob said: Get a punch,nail anything the size of the pin & tap it out! They might of had a problem with the timing slipping is why the did that.You might try putting a screwdriver in the slot & gently try to pry it open. After my nap! Quote
Members DavidMillsSaddlery Posted May 12, 2020 Author Members Report Posted May 12, 2020 figured it out! Quote
Members DavidMillsSaddlery Posted May 12, 2020 Author Members Report Posted May 12, 2020 I got it figured out! @CowboyBob show me a screen shot of the place you said there was a nut or bolt missing? I have napped since then! Quote
Members DavidMillsSaddlery Posted May 12, 2020 Author Members Report Posted May 12, 2020 Good news! I just got off the phone with Tony Luberto! He said that they did the pin thing at the factory in Idaho on the earlier units! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.