Members Constabulary Posted May 18, 2020 Members Report Posted May 18, 2020 Found this while looking for ZZ feet with L+R side guide. Haven't seen this type of presser foot for the 441 type machine before so I just wanted to share this. http://www.khsew.com/index.php?route=product/product&path=182&product_id=462 Maybe useful for some folks here. Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
RockyAussie Posted May 18, 2020 Report Posted May 18, 2020 This post here shows a little on these feet and what they can do. https://leatherworker.net/forum/topic/44002-spring-loaded-edge-guide-presser-feet-compensating-guides/?tab=comments#comment-275142 I mostly find that the dog foot and needle plate are very useful as they allow a lot closer stitching to the edge without all the wobbling around.This post I believe shows what I am saying quite well. https://leatherworker.net/forum/topic/77229-cowboy-cb4500441-narrow-feed-dog-needlethroat-plate/?tab=comments#comment-510835 Quote Wild Harry - Australian made leather goodsYouTube Channel Instagram
Members nylonRigging Posted May 19, 2020 Members Report Posted May 19, 2020 On 5/18/2020 at 8:21 AM, Constabulary said: Found this while looking for ZZ feet with L+R side guide. Haven't seen this type of presser foot for the 441 type machine before so I just wanted to share this. http://www.khsew.com/index.php?route=product/product&path=182&product_id=462 Maybe useful for some folks here. Expand Nice find . could use a couple sizes of those edge-guide Center feet . There is Something on there website you linked on there ( Co.main page ) about suspension of overseas shipping ? cant read Chinese for details ? . but if they not shipping at this moment, it probably only temporary till the Covid19 fiasco stops being the accepted normal . . Quote
Members Constabulary Posted May 19, 2020 Author Members Report Posted May 19, 2020 haven´t noticed that these feet have been discussed before... @NylonRiging - maybe worth checking with them - meanwhile the Chinese Ebay sellers f.i. ship overseas again. Maybe KH just has not updated their front page banners. Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.