Members DebHop Posted August 8, 2020 Members Report Posted August 8, 2020 This has been theraputic for me while 'sheltering at home'. I really enjoyed putting this together - and finally found use for some spikes I had laying around. Laced with 1/8' roo lace, hinged lid with magnet buckles. Awsome pattern by Paintyee on Etsy. Quote
Members battlemunky Posted August 8, 2020 Members Report Posted August 8, 2020 That's a really cool idea and it looks like you executed really well too. Quote
Members YinTx Posted August 23, 2020 Members Report Posted August 23, 2020 Awesome. I can just see the look on folks' faces when you are out and about with that! YinTx Quote
Members maxdaddy Posted August 25, 2020 Members Report Posted August 25, 2020 That turned out great! I made the same pattern and afterwards I was found myself wishing I had used another closure type besides the zipper. I really like how you did yours, and may make another and steady your solution. Can you share a few more pictures of it open along with the latch, if any. Quote
Members DebHop Posted September 1, 2020 Author Members Report Posted September 1, 2020 On 8/23/2020 at 6:37 PM, YinTx said: Awesome. I can just see the look on folks' faces when you are out and about with that! YinTx LOL yes! I carried it to the grocery store on Senior Day. Quote
Members DebHop Posted September 2, 2020 Author Members Report Posted September 2, 2020 On 8/24/2020 at 11:15 PM, maxdaddy said: That turned out great! I made the same pattern and afterwards I was found myself wishing I had used another closure type besides the zipper. I really like how you did yours, and may make another and steady your solution. Can you share a few more pictures of it open along with the latch, if any. I love this pattern. It took a little trial and error to get the lid fitted with a leather hinge instead of the zipper. I cut the pattern out and made a paper model first to get everyting to fit. I increased the whole pattern by 25% cause I wanted it a little bigger. I lined the bag rim with steel corset boning to keep it's shape. I cut the 2 center strips on the lid about 3" longer in the front so I could wrap it around the steel boning, cut a rectangle piece and stitched it on the inside. Then I made a flap for the back, and installed 2 magnetic snaps. I used 2 snaps so it would stay secure, and didn't interfere with the lacing up the middle. When I make this again, I'll probably move the D rings forward so it will hang more level. I hope the pictures help illustrate what I did. Now, you must show us yours. Please Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.