Members mrbeebs23 Posted August 26, 2020 Members Report Posted August 26, 2020 Hello fellow Leather Crafters! I need some help finding a border tool with the exact design. If not exact then extremely similar... See attached photo. I have been commissioned to reproduce three leather panels to an old chair bought in Costa Rica. As you can see from the photos the leather has certainly seen its days. I could maybe get a way with a diamond pattern. Before I bring up options to my customer, I thought I'd share with you all and see if there may be some leads in hunting down that design. (I could carve the original design myself but that'll take way too long and not be cost effective to my customer.) Thank you for your help! W/ gratitude, Brett C. Quote
CFM chuck123wapati Posted August 26, 2020 CFM Report Posted August 26, 2020 1 hour ago, mrbeebs23 said: Hello fellow Leather Crafters! I need some help finding a border tool with the exact design. If not exact then extremely similar... See attached photo. I have been commissioned to reproduce three leather panels to an old chair bought in Costa Rica. As you can see from the photos the leather has certainly seen its days. I could maybe get a way with a diamond pattern. Before I bring up options to my customer, I thought I'd share with you all and see if there may be some leads in hunting down that design. (I could carve the original design myself but that'll take way too long and not be cost effective to my customer.) Thank you for your help! W/ gratitude, Brett C. I've never seen one for sale but you can make that design with a file pretty easy IMO . I count six file cuts on a rectangular blank. Use a triangular needle file on some soft steel like a bolt head or some such Very cool and I'm gonna make one lol. It could have even been made with/ on a wheel stamp Quote
Members mrbeebs23 Posted August 26, 2020 Author Members Report Posted August 26, 2020 (edited) Thanks for the response Chuck! How much to make me one? It may be easy for you but I feel like tool making is out of my wheelhouse. Good luck, and let me know! All the best, Edited August 26, 2020 by mrbeebs23 Quote
CFM chuck123wapati Posted August 26, 2020 CFM Report Posted August 26, 2020 (edited) 15 minutes ago, mrbeebs23 said: Thanks for the response Chuck! How much to make me one? It may be easy for you but I feel like tool making is out of my wheelhouse. Good luck, and let me know! All the best, let me see what i can do then i'll send you a message tomorrow. Can you measure it for me? Edited August 26, 2020 by chuck123wapati Quote
Members mrbeebs23 Posted August 26, 2020 Author Members Report Posted August 26, 2020 The existing panels are with my customer in Chicago. I'll ask her to measure it for me. The height looks obvious but where should I have her measure the width Quote
CFM chuck123wapati Posted August 26, 2020 CFM Report Posted August 26, 2020 7 minutes ago, mrbeebs23 said: The existing panels are with my customer in Chicago. I'll ask her to measure it for me. The height looks obvious but where should I have her measure the width across the points of the x, the tip of each point is the corner of the rectangle of the stamp. i would bet that the original was a hand made stamp if the chair has any age to it. Quote
Members Rahere Posted August 27, 2020 Members Report Posted August 27, 2020 17 hours ago, mrbeebs23 said: Hello fellow Leather Crafters! I need some help finding a border tool with the exact design. If not exact then extremely similar... See attached photo. I have been commissioned to reproduce three leather panels to an old chair bought in Costa Rica. As you can see from the photos the leather has certainly seen its days. I could maybe get a way with a diamond pattern. Before I bring up options to my customer, I thought I'd share with you all and see if there may be some leads in hunting down that design. (I could carve the original design myself but that'll take way too long and not be cost effective to my customer.) Thank you for your help! W/ gratitude, Brett C. This is fairly specific, so perhaps rather than going for a ready-made tool, you could design one in a 3-D program and have it printed for you? Thingiverse and Shapeways come to mind, using ABS plastic (the sort of thing Lego's made of). The original was probably wet-pressed into a hand-carved mold. Quote
CFM chuck123wapati Posted August 27, 2020 CFM Report Posted August 27, 2020 (edited) 2 hours ago, Rahere said: This is fairly specific, so perhaps rather than going for a ready-made tool, you could design one in a 3-D program and have it printed for you? Thingiverse and Shapeways come to mind, using ABS plastic (the sort of thing Lego's made of). The original was probably wet-pressed into a hand-carved mold. lol literally far less than 20 minutes to this point where I will fine tune it. No computer no 3d printer, no cad program, no waste of time building a piece of plastic that wont last a week. I will go out on a limb here and say all of the older stamps were made just like i made this, with hands and a hand tool. You can see in the op picture where each was stamped as there are places where the stamps didn't line up such as the area right in the middle of the picture.. PS excuse my stamping i didn't allow enough time for thorough casing so the ridges didn't stamp in well. Edited August 27, 2020 by chuck123wapati Quote
Members mrbeebs23 Posted August 27, 2020 Author Members Report Posted August 27, 2020 Great work! I see you got both sides pretty much straight and lined up (from the looks of your last photo.) Let me know how much you'd sell one of these for. I'll send a pic to my customer and see if she wants to go through with it. If not, I'm still interested in buying this off of you. I love the pattern! Quote
Contributing Member fredk Posted August 28, 2020 Contributing Member Report Posted August 28, 2020 @chuck123wapati ~ brilliant work, most excellent Quote
CFM chuck123wapati Posted August 28, 2020 CFM Report Posted August 28, 2020 1 hour ago, fredk said: @chuck123wapati ~ brilliant work, most excellent Thank you I appreciate that. Quote
CFM chuck123wapati Posted August 28, 2020 CFM Report Posted August 28, 2020 On 8/26/2020 at 1:36 PM, mrbeebs23 said: Hello fellow Leather Crafters! I need some help finding a border tool with the exact design. If not exact then extremely similar... See attached photo. I have been commissioned to reproduce three leather panels to an old chair bought in Costa Rica. As you can see from the photos the leather has certainly seen its days. I could maybe get a way with a diamond pattern. Before I bring up options to my customer, I thought I'd share with you all and see if there may be some leads in hunting down that design. (I could carve the original design myself but that'll take way too long and not be cost effective to my customer.) Thank you for your help! W/ gratitude, Brett C. Here is 1/4" by 1/3" Quote
Members Aven Posted August 28, 2020 Members Report Posted August 28, 2020 Nicely done! Planning on making a few o them? Quote
Members Hildebrand Posted August 28, 2020 Members Report Posted August 28, 2020 Nice job @chuck123wapati that looks great. Perfect engineering to get an unavailable tool. Todd Quote
CFM chuck123wapati Posted August 31, 2020 CFM Report Posted August 31, 2020 On 8/28/2020 at 1:38 PM, Aven said: Nicely done! Planning on making a few o them? LOL well I wasn't exactly planning on making these but i have always loved a good self induced challenge. On 8/28/2020 at 2:08 PM, Hildebrand said: Nice job @chuck123wapati that looks great. Perfect engineering to get an unavailable tool. Todd Thank you. Quote
CFM chuck123wapati Posted September 2, 2020 CFM Report Posted September 2, 2020 On 8/26/2020 at 1:36 PM, mrbeebs23 said: Hello fellow Leather Crafters! I need some help finding a border tool with the exact design. If not exact then extremely similar... See attached photo. I have been commissioned to reproduce three leather panels to an old chair bought in Costa Rica. As you can see from the photos the leather has certainly seen its days. I could maybe get a way with a diamond pattern. Before I bring up options to my customer, I thought I'd share with you all and see if there may be some leads in hunting down that design. (I could carve the original design myself but that'll take way too long and not be cost effective to my customer.) Thank you for your help! W/ gratitude, Brett C. Here is the set i made , both are stainless steel. The 1 oz solid silver border tool not included lol. Quote
Members Aven Posted September 2, 2020 Members Report Posted September 2, 2020 Those turned out a treat. Well done! I love the border tool you used between the stamps. How much for a pair? Quote
Members Retswerb Posted September 2, 2020 Members Report Posted September 2, 2020 You finished those up nicely, @chuck123wapati! Nice work. Quote
CFM chuck123wapati Posted September 4, 2020 CFM Report Posted September 4, 2020 On 9/2/2020 at 9:38 AM, Aven said: Those turned out a treat. Well done! I love the border tool you used between the stamps. How much for a pair? yes i can make another set, i will post them here when i get them done. But warning it may be a week or two. On 9/2/2020 at 10:08 AM, Retswerb said: You finished those up nicely, @chuck123wapati! Nice work. Thank you! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.