Members logohigh Posted October 2, 2020 Members Report Posted October 2, 2020 Hi hope this is right section is there anything special about needleplate screws ..? iv been to specialist nut n bolt shops but the ones come away with are either not the right thread - or possibly the thread they are going into is fubured ... Either way. the head is too big .Should be 6mm TIA Duncan ( Sail/cover maker ). Quote
Moderator Wizcrafts Posted October 2, 2020 Moderator Report Posted October 2, 2020 They will be metric thread. Contact an industrial sewing machine dealer to get the right parts. Don't ruin the threads to save a few bucks on local, wrong pitch parts. Quote
Members shoepatcher Posted October 2, 2020 Members Report Posted October 2, 2020 Amen to that reply Wiz. glenn Quote
Members Constabulary Posted October 2, 2020 Members Report Posted October 2, 2020 they just cost a few bucks - sample: https://www.college-sewing.co.uk/9400000013-992003376-needle-plate-screw-adler-genuine.html Most industrial sewing machine dealer should have them. And it would not surprise me if they have the same threading as singer 111 needle plate screws but I´m not 100% sure Quote
Members logohigh Posted October 2, 2020 Author Members Report Posted October 2, 2020 (edited) 2 hours ago, Constabulary said: they just cost a few bucks - sample: https://www.college-sewing.co.uk/9400000013-992003376-needle-plate-screw-adler-genuine.html Most industrial sewing machine dealer should have them. And it would not surprise me if they have the same threading as singer 111 needle plate screws but I´m not 100% sure i bought these exact ( im in UK ) , they dont fit - that was when i went to specialist nutn bolt store who have a great rep for getting what you want Thanks all for replies ! Edited October 2, 2020 by logohigh Quote
Members logohigh Posted October 2, 2020 Author Members Report Posted October 2, 2020 im guessing at this point its not the machine screw thats the problem - damn Quote
Members Constabulary Posted October 2, 2020 Members Report Posted October 2, 2020 Thant surprises me cause CS is selling OEM screws as it seems. You never know if one of the previous owners bubba`ed something on the machine. Used machines can be tricky sometimes. Quote
Members Kryptonite Posted October 4, 2020 Members Report Posted October 4, 2020 Cowboy Bob at Toledo Sewing just sold me 2 of these screws - for peanuts - lol. Quote
Members logohigh Posted October 12, 2020 Author Members Report Posted October 12, 2020 Turns out the nearside screw hole is fubared , screw just drops in .....other side is better Thankfully ! must taken a long time to get like that i would naturally assumed the machine would be harder than the screw Quote
Members logohigh Posted October 12, 2020 Author Members Report Posted October 12, 2020 The screws from college sew have a 7mm head which would leave them proud of the plate ... perhaps they are for a non OE plate Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.