GMcCaddon Report post Posted October 24, 2020 (edited) My neighbor's parents gifted him the mailbag when he graduated about 20 years or so ago and it was in pretty sad shape when he asked if I could do some repair work. It was a previously refurb'd and slightly modified vintage mailbag. My best guess when researching it appears to be a J. Pederman brand. I started this project at the beginning of March this year and with mostly weekend time to work on it, finally finished it this past week following advise from you more experienced posters in this wonderful community. Unfortunately, I accidentally deleted the hinge manufacturing I did to replace the broken hinges but this video displays the before and after. I used Preservation Solutions Leather Cleaner and Leather Rejuvenator which took me about 16 hours to go over the entire bag. The old fish smell was successfully removed. I replaced some of the rotting thread, reburnished the exterior edges and even used some of the stitching advise found here to help mostly flatten the edges of the edge wave on the flap which developed when the stiffening grime was removed. There's a lot of great advise from this community generously provided to other inquiries for which I'm grateful. Greg Edited October 25, 2020 by Northmount fixed video link Quote Share this post Link to post Share on other sites
fredk Report post Posted October 24, 2020 Photos placed directly on here are good I never go to strange, unknown links, especially video ones Quote Share this post Link to post Share on other sites
YinTx Report post Posted October 24, 2020 Agree about the links. Usually YouTube videos link fine here though, not sure why yours did not? I did search for it on YouTube and found it. Nice work, those bags are apparently quite collectible and expensive. Interesting work! Did you nourish the leather with anything? Or leave it as is? YinTx Quote Share this post Link to post Share on other sites
GMcCaddon Report post Posted November 2, 2020 (edited) Thank you. I don't know why the YouTube link didn't work. Its fully public. I'll take another look at it. I used Preservation Solutions Leather Rejuvenator and let it soak for a couple of days in a black plastic bag. It worked wonders with the leather and made it supple again. After it was all said and done, I did a treatment of Neatsfoot oil and let that soak in the plastic bag for another day. Beyond that no further treatment. Ah I just looked at my OP and noted Northmount fixed the link. Thank you! Edited November 2, 2020 by GMcCaddon added comment Quote Share this post Link to post Share on other sites
fredk Report post Posted November 2, 2020 That looks well refurbished. It should last a good few more years now Quote Share this post Link to post Share on other sites
charliegamer007 Report post Posted November 2, 2020 I like the work you did on that bag, great job. Quote Share this post Link to post Share on other sites
GMcCaddon Report post Posted November 3, 2020 Thanks! This hobbyist wouldn't have tackled this kind of job were it not for the great advise and links to some valuable videos and pictures found here. Quote Share this post Link to post Share on other sites
SaintJoy18 Report post Posted November 3, 2020 Wonderful work. I especially like the attention to detail that you put into placing the rivets along the opening in the same direction. I saw the "original refurb" had them going back and forth. Makes for a much cleaner and more professional look. Quote Share this post Link to post Share on other sites
GMcCaddon Report post Posted November 4, 2020 On 11/3/2020 at 8:10 AM, SaintJoy18 said: Wonderful work. I especially like the attention to detail that you put into placing the rivets along the opening in the same direction. I saw the "original refurb" had them going back and forth. Makes for a much cleaner and more professional look. Thank you. I had debated going with the original look and took my advisement to the owner and he agreed with the look. Quote Share this post Link to post Share on other sites