Josh Ashman Report post Posted March 30, 2021 Finished this little carry set for a G29SF up the other day. Everything is built from 8 oz. HO with the belt being doubled. Finish is some old water based Tandy cocobolo that's been cut with water to about 50/50. Once that died I rubbed it with liquid saddle soap and a soft rag (AKA old t shirt) to try and get all surface dye to come off. Then stitched them up, edged them, formed, edge dyed, light NF oil and top coated with M&G cut 50/50 with water. I don't have a G29SF pistol or mold so I used a G21 for the width and a G19 for the length (knowing that the G29 was about 1/4" shorter). It all worked out well. All the best, Josh Quote Share this post Link to post Share on other sites
battlemunky Report post Posted March 30, 2021 Beautiful. Quote Share this post Link to post Share on other sites
Josh Ashman Report post Posted March 30, 2021 Thanks guys! Quote Share this post Link to post Share on other sites
chuck123wapati Report post Posted March 30, 2021 oh yea top notch! Quote Share this post Link to post Share on other sites
RemingtonSteel Report post Posted March 30, 2021 Great coloring... very unique. Clean lines, clean stitching... what's not to like! Oh, and I always like a good roller buckle for a CCW rig. Quote Share this post Link to post Share on other sites
JayEhl Report post Posted March 30, 2021 man, that leather looks beefy! great job! Quote Share this post Link to post Share on other sites
Josh Ashman Report post Posted March 31, 2021 Thanks again folks! RemingtonSteel, I get those roller buckles are from Weaver and they really are nice for a carry belt. All the best, Josh Quote Share this post Link to post Share on other sites
