Members hashtagartz Posted May 10, 2021 Members Report Posted May 10, 2021 I am making a holster for a Ruger p85 and I have tons of of molds but not the P85. Was hoping one of you gun guys can point me to a compatible gun to use to help with the making of this holster. Thanks Quote
Members sbrownn Posted May 10, 2021 Members Report Posted May 10, 2021 Why don't you just borrow the clients p85? Quote
CFM chuck123wapati Posted May 10, 2021 CFM Report Posted May 10, 2021 pull out your molds that have the right length barrel then pull up a picture of the p85 and compare, after that go online and check dimensions for width length etc. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Members hashtagartz Posted May 10, 2021 Author Members Report Posted May 10, 2021 6 hours ago, sbrownn said: Why don't you just borrow the clients p85? I would but its an online order. 5 hours ago, chuck123wapati said: pull out your molds that have the right length barrel then pull up a picture of the p85 and compare, after that go online and check dimensions for width length etc. I ended up doing just that. Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.