Members Stewart Posted October 31, 2021 Members Report Posted October 31, 2021 Until I come up with a pattern for the new phone, this one will work. I did this earlier this year for a naa 22. Never used it . I did not fit right on my belt. The phone fills it out and it sits ok. Now the workmanship Well there is always something a little off when I do things. It's in my Genes. This time is the stitch line. i can do this type of owrk ,but the thing is Paint covers a lot of mistakes. Quote
CFM chuck123wapati Posted October 31, 2021 CFM Report Posted October 31, 2021 i think your stitch line is pretty good, if you straighten the edge it will be less noticeable but you see more of the mistakes that others wont notice. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Members Stewart Posted October 31, 2021 Author Members Report Posted October 31, 2021 Got ya. I am the one that can take a 6 molding and only need 3 inchs and end up screwin 6 ft of noard to make fit. So i'll just leave it as is. Quote
CFM Frodo Posted October 31, 2021 CFM Report Posted October 31, 2021 1 hour ago, Stewart said: Got ya. I am the one that can take a 6 molding and only need 3 inchs and end up screwin 6 ft of noard to make fit. So i'll just leave it as is. Take a look here, https://leatherworker.net/forum/topic/90382-cell-phone-holster/?tab=comments#comment-621776 see if that gives you any ideas Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
Members Stewart Posted November 1, 2021 Author Members Report Posted November 1, 2021 22 hours ago, Frodo said: Take a look here, https://leatherworker.net/forum/topic/90382-cell-phone-holster/?tab=comments#comment-621776 see if that gives you any ideas I did look and the design is someting to work with.Do need to add to the belt. You all that check my works out and comment is really appreciated. You alls work are far more advanced - Top of the craft. So thank you for suggestions. Quote
CFM Frodo Posted November 2, 2021 CFM Report Posted November 2, 2021 13 hours ago, Stewart said: I did look and the design is someting to work with.Do need to add to the belt. You all that check my works out and comment is really appreciated. You alls work are far more advanced - Top of the craft. So thank you for suggestions. OH NOOO...not me. I am learning every day. I see some work on here that is so far above my skill level that the computer will noty let me look at it On that phone holster of mine. leave the leather belt loop off and add a metal gun holster clip. if you do that, it can clip onto your pockets or your waist band or take the clip of of a broken tape measure lol that works also Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
CFM chuck123wapati Posted November 2, 2021 CFM Report Posted November 2, 2021 (edited) heres how i get around the belt no belt problem. The back flap will stick in your waistband or even your pocket, the snap allows you to take it off or put it on without taking off your belt too. Use two layers on the flap to make it stiff. Edited November 2, 2021 by chuck123wapati Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
PastorBob Posted November 3, 2021 Report Posted November 3, 2021 Great idea, @chuck123wapati. I like the rivets at the top corners as well. Quote In God's Grace, Pastor Bob "While we were yet sinners, Christ died for us." - Romans 5:8 www.PastorBobLeather.com YouTube Channel
CFM chuck123wapati Posted November 3, 2021 CFM Report Posted November 3, 2021 1 hour ago, PastorBob said: Great idea, @chuck123wapati. I like the rivets at the top corners as well. thanks it will out last the phone for sure. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Members Stewart Posted November 7, 2021 Author Members Report Posted November 7, 2021 On 11/2/2021 at 12:15 AM, Frodo said: OH NOOO...not me. I am learning every day. I see some work on here that is so far above my skill level that the computer will noty let me look at it On that phone holster of mine. leave the leather belt loop off and add a metal gun holster clip. if you do that, it can clip onto your pockets or your waist band or take the clip of of a broken tape measure lol that works also it.s been a year or more that I have made anytning along those lines. It shows on this it' s 1/2 way done. a pebbled back ground. put the card holder along in the picture to show what level i wasdoing befopre the break. The book in the bcakgroun is a story I wrote about one of our cats we had. Did three all total . head Libirain at our local Libary said I should publish it for kids. Quote
CFM Frodo Posted November 7, 2021 CFM Report Posted November 7, 2021 I think it would be a great idea to look into publishing a children's book Your beginning stitching looks way better than my beginning. LOL mine was really really bad On 11/2/2021 at 10:56 AM, chuck123wapati said: heres how i get around the belt no belt problem. The back flap will stick in your waistband or even your pocket, the snap allows you to take it off or put it on without taking off your belt too. Use two layers on the flap to make it stiff. Great Idea. I am going to try it out. Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.