Phone case

[Stewart]

Until I come up with a pattern for the new phone, this one will work.

I did this earlier this year for a naa 22. Never used it . I did not fit right on my belt. The phone fills it out and it sits ok.

Now the workmanship Well there is always something a little off when I do things. It's in my Genes. This time is the stitch line.

i can do this type of owrk ,but the thing is Paint covers a lot of mistakes.

 

[chuck123wapati]

i think your stitch line is pretty good, if you straighten the edge it will be less noticeable but you see more of the mistakes that others wont notice.

[Stewart]

Got ya. I am the one that can take a 6 molding and only need 3 inchs  and end up screwin 6 ft of noard to make fit.

 So i'll just leave it as is.

[Frodo]

1 hour ago, Stewart said:

Got ya. I am the one that can take a 6 molding and only need 3 inchs  and end up screwin 6 ft of noard to make fit.

 So i'll just leave it as is.

Take a look here,  https://leatherworker.net/forum/topic/90382-cell-phone-holster/?tab=comments#comment-621776

see if that gives you any ideas

[Stewart]

22 hours ago, Frodo said:

Take a look here,  https://leatherworker.net/forum/topic/90382-cell-phone-holster/?tab=comments#comment-621776

see if that gives you any ideas

I did look and the design is someting to work with.Do need to add to the belt.

You all that check my works out and comment is really appreciated.

You alls work are far more advanced - Top of the craft.

So thank you for suggestions.

[Frodo]

13 hours ago, Stewart said:

I did look and the design is someting to work with.Do need to add to the belt.

You all that check my works out and comment is really appreciated.

You alls work are far more advanced - Top of the craft.

So thank you for suggestions.

OH NOOO...not me.  I am learning every day.   I see some work on here that is so far above my skill level that the computer will noty let me look at it

On that phone holster of mine.  leave the leather belt loop off and add a metal gun holster clip.  if you do that, it can clip onto your pockets or your waist band 

or take the clip of of a broken tape measure  lol  that works also

[chuck123wapati]

heres how i get around the belt no belt problem. The back flap will stick in your waistband or even your pocket, the snap allows you to take it off or put it on without taking off your belt too.

Use two layers on the flap to make it stiff. 

Edited November 2, 2021 by chuck123wapati

[PastorBob]

Great idea, @chuck123wapati.  I like the rivets at the top corners as well.

[chuck123wapati]

1 hour ago, PastorBob said:

Great idea, @chuck123wapati.  I like the rivets at the top corners as well.

thanks it will out last the phone for sure.

[Stewart]

On 11/2/2021 at 12:15 AM, Frodo said:

OH NOOO...not me.  I am learning every day.   I see some work on here that is so far above my skill level that the computer will noty let me look at it

On that phone holster of mine.  leave the leather belt loop off and add a metal gun holster clip.  if you do that, it can clip onto your pockets or your waist band 

or take the clip of of a broken tape measure  lol  that works also

it.s been a year or more that I have made anytning along those lines. It shows on this it' s 1/2 way done.  a pebbled  back ground. put the card holder along  in the picture to show what level i wasdoing befopre the break. The book in the bcakgroun is a story I wrote about one of our cats we had. Did three all total . head Libirain  at our local Libary said I should publish it for kids.

[Frodo]

I  think it would be a great idea to look into  publishing a children's book

Your beginning stitching looks way better than my beginning.  LOL  mine was really really bad

On 11/2/2021 at 10:56 AM, chuck123wapati said:

heres how i get around the belt no belt problem. The back flap will stick in your waistband or even your pocket, the snap allows you to take it off or put it on without taking off your belt too.

Use two layers on the flap to make it stiff. 

Great Idea.   I am going to try it out.