Edge presser foot for Juki 1341

[Klonky]

Hello Everyone.

I've been reading posts here for a little while and I have found it very helpful.

This is my first post, I am very much a beginner and have only made one bag and a few journal covers so far with a Singer 29k 73 patcher.

I hope I have put this  in the right place.

I am about to get a Juki 1341 cylinder arm machine and I wondered if anyone can tell me if I can fit a sprung edge presser foot to it.

This is the kind of thing I am talking about.

It has a sort of blade that sits in the groove of a stitch and helps straight stitching of a French seam say.

https://www.aliexpress.com/item/32878608316.html?spm=a2g0o.detail.1000014.60.5273ab36pGfXNv&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.177756.0&scm_id=1007.13338.177756.0&scm-url=1007.13338.177756.0&pvid=69231256-470d-4a7a-b6fa-3c1bfc91bf3f&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.13338.177756.0,pvid:69231256-470d-4a7a-b6fa-3c1bfc91bf3f,tpp_buckets:668%232846%238111%231996&&pdp_ext_f={"sku_id":"65594689632","sceneId":"23416"}

Also is it possible to get a list of compatible feet for a 1341?

I'd be glad of any help.

Regards

K.

[toxo]

I have this set for my Durkopp 239. they are handy. When you find them for the Juki I think they'll be considerably more expensive. I know they were for my Adler 69 although the blurb says they're for Juki.

Edited November 20, 2021 by toxo

[Northmount]

@Klonky Moved your post to Leather Sewing Machines.

[Wizcrafts]

Spring loaded, walking foot, edge guide feet are sold all over the Interwebs. Most industrial sewing machine dealers sell them. Most use the same inside foot. You can buy them on ebay too.

Since you are in the UK, here are some available within your area. They have them is several spacings for the same money.

 

[Klonky]

Wow, Thank you so much for the replies! 
Thank you Northmount for moving my post to the appropriate place. Apologies everyone

 

K

[Arturomex]

In answer to your question about a list of feet for your new machine, (and someone please correct me if I'm wrong) I believe a Juki 1341 will take most any foot listed for Singer 111 machines. As Wiz noted, there's a lot of them out there. While shipping can take a bit of time, I've found that Cutex, on ebay, has a great selection at reasonable prices.

Regards,

Arturo

[Klonky]

Thanks so much Arturomex and Wizcraft and Toxo!

This is very helpful.

 

K.