Post bed wanted

[RockyAussie]

5 hours ago, Silverd said:

Reality good info.  Thank you!

It makes sense the work height of a tall post is at standing level. Agree it's a minor issue.  

Techsew makes a tall post version.  Who else might I look at?  

Thanks again

Silverd

 

I don't know what is around your area but if you search for high post bed machine 8365 you will get a lot of results. Here are a couple that show the product a bit better than many of the other ones you get. Take note of the needle close to the edge and also where in one video you can see where a tall tote can be stitched down the side so easily.

https://www.alibaba.com/product-detail/leather-bags-8365-high-post-bed_60468228341.html?spm=a2700.7724857.normal_offer.d_image.591c2784YURSK5

https://www.alibaba.com/product-detail/Small-hook-8365-handbag-making-super_62418261641.html?spm=a2700.7724857.normal_offer.d_title.591c2784vIkM2T

as you will see you can get them in different heights and left or right side of the post etc.

 

[Silverd]

Very helpful the Alabama links.  Thank you

Name brand machines very expensive.  Have you purchased / used a Chinese non name brand manufacturer?  Most sewers today come out of China most I understand. And the China folks are quite capable of making exceptional products, but like anything else there are the good and the bad.  

Also, left or right side needle...any preference that I'm missing?

 

Silverd

[Silverd]

A small hand bag I'm working to complete between our conversations!

 

Silverd

[RockyAussie]

1 hour ago, Silverd said:

Have you purchased / used a Chinese non name brand manufacturer? 

Sort of but not really. I am working on getting some into OZ at present but they will be a known brand as long as they past all my tests. (February 2022 I believe) Note: most dealers have to do a lot in the background to ready these machines up for the general public.

 

1 hour ago, Silverd said:

Also, left or right side needle...any preference that I'm missing?

My preference is needle on the right as that means if you want to say sew around the base with the bag down over the horn you don't have the body of the machine getting in the way while you work your way around. That is a big bag you are stitching in the picture above and I bet your glad you are not trying to do IT in the throat of the machine

I have to ask.....have you got one of our narrow needle plate dog foot sets installed?

Hope to see your bag when you finish it. I wish you a Merry Christmas

Brian

[Silverd]

The Alibama sourced machines not ready for most consumers are you saying?  There should be at least one or two of them that have it together....

Right side it is!.  Good tip that I never would have anticipated.

Yes, a big bag!  Took on the project as a repair / recondition job but the original leather was too far gone so I'm restoring completely.   Replated or polished original hardware.  Re-wraping the handles and top rails with leather have been the highlights of the project.  Down to final assembly which will include hand stitching the 4 corner protectors into place and joining the frame to the trunk body.  Still don't know how I'm going to do that yet!

Best of Season Wishes 9

Silverd

[RockyAussie]

6 hours ago, Silverd said:

There should be at least one or two of them that have it together....

You still believe in Santa dontcha. These machines don't come all assembled and threaded and timing checked and check springs set and tensioned up for any given size thread and after all of a whole lot more than that ....pack it all up and box it all again. Generally you don't get much if any saving if you are buying a one off machine. Try a minimum of a pallet load. There is a lot more in it than a quick glance would leave you to believe. (Freight is like beyond a joke $$$$$$$ with so few regular planes in the air taking up the slack) . Do a lot of homework before you go too deep and maybe learn Chinese.

Edited December 22, 2021 by RockyAussie

[Silverd]

Hahaha...I actually work with a Chinese mechanical engineer who is an off-shore sourcing expert and is willing to help!  I'll keep you up-dated on my progress.  That said, Techsew might be the reasonable alternative to "rolling the dice" with an unknown Alibaba supplier but we will make a few calls.

Thanks for your input

Silverd

[Silverd]

14 hours ago, RockyAussie said:

Sort of but not really. I am working on getting some into OZ at present but they will be a known brand as long as they past all my tests. (February 2022 I believe) Note: most dealers have to do a lot in the background to ready these machines up for the general public.

 

My preference is needle on the right as that means if you want to say sew around the base with the bag down over the horn you don't have the body of the machine getting in the way while you work your way around. That is a big bag you are stitching in the picture above and I bet your glad you are not trying to do IT in the throat of the machine

I have to ask.....have you got one of our narrow needle plate dog foot sets installed?

Hope to see your bag when you finish it. I wish you a Merry Christmas

Brian

Hi

Forgot to answer your narrow needle foot question.  I have not but read something about it.  Are you selling them?

 

Don

[RockyAussie]

7 hours ago, Silverd said:

Hi

Forgot to answer your narrow needle foot question.  I have not but read something about it.  Are you selling them?

Hey Don,

Have a look in this link and the video's showing them in use.

If you want a set of them pm me with your address details and a email to send you an invoice to and we can make it happen.

Brian

[Silverd]

Sure.

 

Don Earl

2601 Pyrite Place

Oxnard. California 93030